Power adapter cable ShiverPeaks BS09-07015 IEC C14 to CEE 7/3, 1 mm² conductor, for UPS, 0.5 m

ShiverPeaks BS09-07015 is a 0.5 m power adapter cable that converts an IEC C14 inlet to a CEE 7/3 (Schuko) plug. Intended for connecting uninterruptible power supplies (UPS) and other equipment with an IEC C14 inlet to standard mains sockets, this short adapter provides a compact solution for temporary or permanent connections where a full-length mains lead is not required. The cable uses a 1 mm² conductor cross-section suitable for typical residential and office mains currents and is designed for straightforward, safe power delivery between device and wall outlet.

Advantages

The adapter cable offers a compact length of 0.5 m that reduces cable clutter and is useful when the UPS or device sits close to the mains socket. With an IEC C14 connector on one end and a CEE 7/3 (Schuko) plug on the other, it ensures mechanical compatibility with common UPS inlets and European mains sockets. The 1 mm² conductor provides standard current carrying capacity for typical IT equipment and ensures consistent power transfer in normal operating conditions.

Suitable for

• Connecting a UPS with an IEC C14 inlet to a European CEE 7/3 (Schuko) mains socket
• Short-distance connections behind racks, workstations, or near wall outlets
• Temporary setups, service work, or test benches where a short adapter is needed

When it may not be suitable

This 0.5 m adapter cable is not intended for long cable runs or installations requiring extended reach; for those situations a full-length mains lead is more appropriate. It is designed for standard mains use and typical IT equipment; it may not meet requirements for heavy-duty industrial loads or specialized medical equipment that demand higher conductor cross-sections, specific certifications, or longer, shielded cables.

Key specifications

• Cable length: 0.5 m
• Connector A: IEC C14 (inlet style connector)
• Connector B: CEE 7/3 (Schuko) plug
• Conductor cross-section: 1 mm²
• Application: Power adapter for UPS and devices with IEC C14 inlet

How to use

Insert the IEC C14 connector into the device's appropriate inlet, ensuring it seats firmly. Plug the CEE 7/3 (Schuko) end into a compatible mains socket that provides the required voltage and grounding. Confirm that the connected UPS or equipment is switched off before making the connection and switch on the device after the cable is securely in place. Regularly inspect the cable and connectors for damage or wear, and replace the cable if any insulation or contact issues are found.

What to consider before purchase

• Ensure your device has an IEC C14 inlet and your mains outlet accepts a CEE 7/3 (Schuko) plug
• Verify that a 1 mm² conductor cross-section is adequate for your device's current draw
• Decide if a 0.5 m cable length suits your installation or if a longer lead is required

Usage recommendations

Use the adapter for short, neat connections between UPS or IT equipment and nearby mains outlets. Avoid coiling the cable tightly during operation and keep it away from heat sources and moving parts. Replace the cable if it shows visible damage or if connector fit becomes loose.