Shumee SBO Concrete Screw M6x60, 100 pieces

The Shumee SBO concrete screw, measuring M6x60, is a professional-grade fastener engineered for high-performance anchoring in solid concrete substrates. This set contains 100 pieces, offering a comprehensive solution for both large-scale construction tasks and smaller renovation projects. These screws are designed to provide exceptional grip and structural integrity, ensuring that fixtures remain securely attached to concrete surfaces over time.

Advantages

The primary benefit of the Shumee SBO concrete screw is its ability to create a secure, mechanical interlock within the concrete, which minimizes the risk of pull-out and ensures long-term stability. The M6x60 dimensions are optimized for standard mounting applications, providing a balance between penetration depth and load-bearing capacity. Because these screws are designed for direct installation, they eliminate the need for separate wall plugs or anchors, significantly reducing the time and effort required for assembly. The high-quality material composition ensures resistance to the stresses of installation, maintaining a reliable hold in various concrete grades.

Suitable for

• Mounting metal brackets and profiles to concrete walls
• Installing wooden battens or frames on concrete floors
• Securing electrical conduits and cable trays
• General construction and renovation fastening tasks

When it may not be suitable

These screws are specifically designed for solid concrete and may not provide adequate holding power in aerated concrete, hollow bricks, or soft masonry materials. They are also not recommended for applications requiring high-level corrosion resistance in outdoor or marine environments unless additional protective coatings are applied.

Key specifications

• Diameter: 6 mm
• Length: 60 mm
• Material: Hardened steel
• Quantity: 100 pieces
• Application: Direct concrete anchoring

How to use

To install the Shumee SBO concrete screw, first drill a pilot hole into the concrete surface using a masonry drill bit of the appropriate diameter. Ensure the hole is slightly deeper than the screw length to accommodate any dust or debris. Clean the hole thoroughly to ensure maximum friction. Insert the screw through the fixture and drive it into the hole using a power drill or impact driver until the head is flush with the surface of the fixture. Do not overtighten to avoid damaging the concrete threads.

What to consider before purchase

• Verify the thickness of the material being mounted to ensure the 60 mm length is sufficient.
• Check the concrete strength class to ensure compatibility with mechanical anchors.
• Ensure you have the correct size of masonry drill bit for the M6 diameter.

Usage recommendations

Always wear appropriate personal protective equipment, such as safety glasses and gloves, when drilling into concrete. Ensure the drill is held perpendicular to the surface to maintain structural integrity of the anchor point.