Power extension cable Sick KF-B-03KP3X1.0 3×1.0 mm², length 1.5 m

Sick KF-B-03KP3X1.0 is a 1.5 m power extension cable with three conductors each sized at 1.0 mm², engineered for short-distance power extension in industrial automation and sensor installations. The cable provides a compact 3×1.0 mm² conductor layout that supports low-current power distribution and signal supply to sensors, actuators and control components, enabling tidy routing inside cabinets and along sensor chains.

Advantages

The cable offers a compact cross-section and flexible length that simplify routing in confined spaces and machine housings. Its three-conductor configuration allows simultaneous connection of power and common signal lines without the need for additional conductors. The 1.5 m length is suitable for bridging short distances between devices, reducing the number of required junctions and potential failure points. The construction is intended for reliable low-current operation in automation environments.

Suitable for

• Extending power to sensors and photoelectric devices in production lines
• Wiring actuators and small motors that require low-current supply
• Internal routing inside control panels and enclosures
• Connecting chained sensor arrays and proximity switch circuits

Key specifications

• Conductor configuration: 3 conductors
• Conductor cross-section: 1.0 mm² per conductor
• Cable length: 1.5 m
• Intended use: low-current power distribution and signal supply
• Typical applications: sensor chains, actuator wiring, control panel routing

How to use

Strip appropriate lengths of insulation from each conductor and make secure terminations using screw terminals, crimp connectors or compatible plug connectors according to the receiving device requirements. Route the cable to avoid sharp edges and moving parts, and secure it with cable ties or clamps to prevent strain on terminations. Observe the device wiring diagrams and ensure correct polarity and grounding where required. For installations in cabinets, plan cable paths to maintain separation from high-voltage or high-current lines if applicable.

Использование и эксплуатация

The cable is designed for indoor industrial environments; protect exposed connections from moisture and corrosive atmospheres and verify compatibility with the system’s current and voltage limits before installation.