Multiswitch Signal MRP-512 — 5 inputs, 12 outputs for satellite and terrestrial TV distribution

Signal Multiswitch MRP-512 is a passive multiswitch designed for combined satellite and terrestrial TV distribution. The device accepts five inputs that combine satellite LNB and terrestrial antenna signals and provides twelve independent outputs for connection to separate receivers or TVs. As a passive unit, it routes signals without built-in amplification, enabling centralized signal management for small multi-dwelling units, apartment buildings or multiroom home installations.

Advantages

The multiswitch offers a compact passive design that does not require a power supply or active components, reducing installation complexity and ongoing power needs. Twelve isolated outputs ensure that each connected receiver receives a dedicated feed, minimizing cross-talk between lines. The combined satellite and terrestrial inputs simplify cabling by allowing both signal types to be fed through the same device, while the durable metal housing provides stable mechanical protection and mounting options.

Suitable for

• Small apartment buildings with up to twelve independent receivers
• Multiroom home setups where several TVs require separate satellite/terrestrial feeds
• Shared distribution in guesthouses, offices or rental units with passive signal routing

Key specifications

• Inputs: 5 combined satellite/LNB and terrestrial antenna inputs
• Outputs: 12 independent outputs for separate receivers or TVs
• Operation: Passive (no internal amplification or power supply required)
• Signal types supported: Satellite signals (from LNB) and terrestrial broadcast signals
• Mounting: Wall or rack-compatible metal housing suitable for installation locations

How to use

Connect the satellite LNB and terrestrial antenna cables to the corresponding combined inputs on the multiswitch. Run coaxial cables from each of the twelve outputs to individual receivers or wall outlets in each apartment or room. As the unit is passive, no power connection is needed; ensure cable lengths and split distances are suitable for signal quality and that each receiver is configured to the correct input type. If long cable runs or many splitters are used in the system, consider external amplification where necessary to maintain signal levels.

Usage recommendations

Place the multiswitch in a dry, ventilated equipment area and use good-quality coaxial cables and F-type connectors to minimize signal loss. For installations with long cable runs or when signal levels are low, add a suitable masthead or distribution amplifier upstream of the multiswitch to ensure reliable reception at each output.