Dreame vacuums for fast and efficient cleaning!
In cart {{totalProductsCount}} item(s)
Your cart is empty
2.5" SATA III SSD SOLIDIGM D3‑S4520 960 GB — 550/510 MB/s, TLC 3D NAND, 256-bit AES
The Solidigm D3-S4520 SATA SSD delivers 960 GB capacity in a 2.5" form factor and is designed to improve server efficiency and IOPS/TB compared with legacy hard disk drives. Built on 144-layer TLC Intel 3D NAND with a fourth-generation controller and SATA firmware, this drive supports read-intensive and mixed workloads while remaining compatible with existing SATA infrastructure.
The Solidigm D3-S4520 reduces operating costs by enabling higher density and lower power and cooling requirements versus 2.5" HDDs. It provides higher IOPS per TB and greater bandwidth efficiency for sequential workloads, and it uses mature firmware that supports non-disruptive updates. The drive’s reliability lowers annualized failure rates compared with HDDs, reducing replacement and maintenance effort.
Install the SSD into a standard 2.5" SATA bay and connect to a SATA III port with a compatible power connector. Ensure the host system firmware and OS support SATA drives and, if required, enable AHCI mode in BIOS. For best results in server environments, follow the vendor’s procedures for RAID or storage controller configuration and run diagnostics after installation to verify the drive is recognized and operating at expected speeds.
Use this Solidigm D3-S4520 SSD for read-intensive and mixed workloads where compatibility with existing SATA infrastructure is required. For larger-scale deployments, consider power and cooling savings when replacing 2.5" HDDs with SSDs and plan firmware updates during maintenance windows to maintain uptime.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}