Extension lead connector Solight PS34 — 1-socket, 30 m, 3×1.5 mm², rubber cable, black

Solight PS34 — 1-socket extension lead connector with a 30 m rubber-insulated cable and 3×1.5 mm² conductor cross-section. The product is intended for temporary power distribution where a single grounded outlet is required at a distance from the fixed supply. The rubber sheath enhances mechanical resistance and provides improved protection against moisture and abrasion compared with standard PVC-sheathed cords, making the unit suitable for demanding environments such as construction sites, workshops and outdoor events.

Advantages

The Solight PS34 combines a long 30 m reach with a single grounded socket and a flexible rubber cable that resists mechanical wear and exposure to moisture. Its 3×1.5 mm² conductors support common portable tools and appliances while maintaining stable conductivity over the run. The unit is compact and simple to deploy for temporary installations and can be coiled for storage without compromising the rubber insulation.

Suitable for

• Temporary power supply for portable electric tools on construction sites
• Powering lighting and equipment at outdoor events and markets
• Workshop use for machines and hand tools located away from fixed outlets
• Garden and landscaping tasks requiring an extended reach

When it may not be suitable

This extension lead connector provides a single socket and a conductor cross-section of 1.5 mm² per core, so it is not intended for continuous high-current loads or powering multiple heavy appliances simultaneously. It is designed for temporary use rather than permanent in-wall or underground installation. For tasks that require multiple outlets or higher current capacity, a multi-socket extension with larger conductor cross-section would be more appropriate.

Key specifications

• Number of sockets: 1 grounded socket
• Cable length: 30 m
• Conductor configuration: 3 cores
• Conductor cross-section: 1.5 mm² per core
• Sheath material: rubber (flexible, moisture-resistant)
• Colour: black
• Intended use: temporary external power distribution

How to use

Unroll the Solight PS34 extension lead connector fully before use to avoid heat accumulation along the cable. Connect the plug to a compatible grounded power outlet and plug the appliance or tool into the single socket. Keep the connector and cable elevated from standing water and avoid routing the cable across sharp edges. After use, disconnect from the mains, wipe off any dirt or moisture, coil the cable loosely and store in a dry place away from direct sunlight and heat sources.

What to consider before purchase

• Required current and power of the connected device(s) relative to 1.5 mm² conductor capacity
• Need for more than one outlet or higher ampacity for heavy equipment
• Environmental exposure: rubber sheath offers improved moisture resistance but is not a substitute for IP-rated sealed connectors
• Length: 30 m provides extended reach but may cause voltage drop for high-load devices

Usage recommendations

For safe operation, use the Solight PS34 for portable tools, lighting and appliances within the rated current limits, avoid prolonged high-load operation, inspect the cable and socket for damage before each use, and fully unroll the cable during operation to reduce heat buildup and minimize voltage drop.