String lights Springos CL4109 — 144 LED, 2 x 2 m grid

Springos® curtain lights with 144 micro LEDs provide cold white illumination across a 2 x 2 m lighting area and are powered from a 3 m cable. The set consumes 3.6 W (220–240 V, 50–60 Hz) and uses energy-saving diodes mounted on durable 1 mm copper wires. LEDs are waterproof and the design includes hermetic connectors and a black plug with transparent insulation. The curtain set is suitable for indoor and outdoor use (IP44) and allows connecting up to three sets; a single LED failure does not disable the whole string.

Advantages

The product includes an eight-function programmer with memory function so the last selected mode is retained. Diodes are energy-efficient and waterproof (can be immersed in water when not connected to power). The construction features durable copper wires resistant to breakage and hermetic connectors for increased reliability. The set is certified (CE, RoHS) and supports connection of up to three sets for larger installations.

Key specifications

• Brand: Springos®
• Type: Curtain lights with 144 micro LEDs
• Lighting color: cold white
• Lighting area: 2 x 2 m
• Total power: 3.6 W
• Input voltage/frequency: 220–240 V, 50–60 Hz
• Output power: 31 V
• Power cable length: 3 m
• Wire diameter: 1 mm (copper)
• Insulation and plug: transparent insulation, black plug
• IP rating: IP44 (suitable for indoor and outdoor use)
• Programmer functions: combination, wave, sequence, slo-glo, flashing, color change, permanent light
• Memory function: yes
• LEDs replaceable: no
• Certificates: CE, RoHS

How to use

Install the curtain lights by hanging the 2 x 2 m lighting part where needed and connect the 3 m power cable to a suitable 220–240 V outlet. Use the 9.2 mm button on the programmer to switch between the eight available modes; the memory function will recall the last selected mode after power cycles. If connecting multiple sets, ensure the total connected sets do not exceed three.

Recommendations

For outdoor use, protect the power supply from moisture and do not connect the lights to power while diodes are immersed in water. Regularly inspect connectors and wires for damage; replace the entire set if the power cable or plug is damaged. To extend service life, avoid sharp bends and mechanical stress on the copper wires.