Springos Mountain Spruce Lux Artificial Christmas Tree, 220 cm, PVC Needles

Springos® Snowy Spruce Lux artificial Christmas tree, total height 220 cm, combines PE needles with eco-friendly PVC film to create a two-tone green and brown appearance with a realistic snowy finish. The tree has 15 levels plus the top, 52 branches and 385 tips, with a maximum width of approximately 110 cm and width at 1 m height about 75 cm. The crown starts 26 cm from the ground; the top length is 34 cm. The set includes a sturdy four-legged metal stand finished in green and covered with the same artificial snow as the tree. The product is supplied for self-assembly and packaged in a 120 x 26 x 30 cm box. Assembly instructions are available electronically via QR code on the packaging.

Advantages

The design uses two types of needles—polyethylene (PE) and PVC film—providing a natural texture and dense look. Artificial snow is applied to both branches and the stand and is designed not to shed. Thick, solid branches allow natural shaping for a full appearance; the two-tone film coloring imitates real branches. The construction is heavy and durable, with a stable four-legged metal stand and clear size tolerance of ±2% for consistent fitting in interiors.

Key specifications

• Brand: Springos®
• Model: Snowy Spruce Lux
• Total height: 220 cm
• Maximum width: approx. 110 cm
• Width at 1 m height: approx. 75 cm
• Levels: 15 + top
• Branches: 52
• Tips: 385
• Needle material: PE + eco-friendly PVC film
• Needle color: green + snowy (two-tone film)
• Crown distance from ground: 26 cm
• Top length: 34 cm
• Branch tip width (individual): approx. 3–6 cm
• Stand type: four-legged metal
• Stand color: green
• Stand height (center): 19 cm
• Leg height: 8–15 cm / 7–14 cm
• Leg length: 30 cm
• Leg tube diameter: 12 mm / 5 mm
• Center sleeve diameter: 4 cm
• Distance between legs (ends): 44 cm
• Stand width: 62 cm
• Snowing: yes (snow fixed on tree and stand)
• Package dimensions: 120 x 26 x 30 cm
• Product for self-assembly; instructions via QR code
• Size tolerance: ±2%

How to use

Unpack the tree from the box and place the four-legged metal stand on a flat, stable surface. Insert the tree sections into the central sleeve and secure each section according to the assembly sequence. Carefully spread and shape the branches starting from the bottom levels to obtain an even and full crown; thick branches can be bent slightly to achieve the desired silhouette. Ensure the stand legs are fully extended and stable before decorating. For storage, compress branches gently and store in the original packaging or another suitable container to protect the needles and snow finish.

Recommendations

Place the tree away from direct heat sources to preserve the PVC film and artificial snow. For the most natural effect, allow time to shape branches after assembly and avoid heavy ornaments on thin branch tips. Follow the electronic assembly guide via the QR code for step-by-step illustrations.