Drill bit STANLEY STA7184 70 mm

The STANLEY STA7184 70 mm drill bit is a single-size cutting tool intended for use with electric drills and drill drivers. With a 70 mm length, it is suitable for creating through-holes and performing drilling tasks in workshop, maintenance and construction environments. The bit is a general-purpose option for applications where a consistent 70 mm drilling depth and diameter are required.

Advantages

This drill bit offers a precise single-size design that simplifies selection for tasks requiring a 70 mm length. It is compatible with standard drill chucks and drill drivers, providing straightforward installation and reliable rotation for common drilling materials. The tool's construction supports consistent hole quality and repeatability during repairs, assembly or light construction work.

Suitable for

• Creating through-holes in wood and soft building materials
• Repair and maintenance tasks that require a fixed 70 mm bit
• Assembly work where repeated identical hole depth is needed
• General-purpose drilling with portable drills and drill drivers

Key specifications

• Length: 70 mm
• Type: single-size drill bit for use with drills and drill drivers
• Intended use: general-purpose drilling for through-holes and repairs
• Compatibility: standard drill chucks and cordless drill drivers

How to use

Secure the drill bit in the drill chuck and tighten according to the drill manufacturer's instructions. Mark the drilling point, align the bit perpendicular to the work surface and start drilling at low speed to establish the hole, then increase speed as appropriate for the material. Apply steady pressure without forcing the bit to avoid bending or breaking. Withdraw the bit periodically when drilling deep holes to clear chips and reduce heat buildup.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and gloves. Select drill speed and feed pressure based on the work material—lower speeds for harder materials and higher speeds for softer materials. Inspect the bit before use for wear or damage and replace if the cutting edge is blunt or chipped to maintain hole quality and safe operation.