Ethernet cable StarTech 100ft (30.5 m) Cat6 U/UTP RJ45 650MHz 100W PoE gold-plated contacts — White

StarTech Cat6 U/UTP Ethernet patch cable, 100 ft (30.5 m) in white, designed to provide reliable Gigabit Ethernet connections and support Power-over-Ethernet up to 100W. The cable meets Category 6 specifications and is suitable for demanding Ethernet applications where consistent performance and secure connector retention are required.

Advantages

The cable uses 24 AWG, 100% copper conductors and 50-micron gold-plated RJ45 contacts to ensure strong conductivity and minimize signal loss from oxidation. Snagless RJ45 connectors and molded strain-relief boots protect the connector clips and termination points during installation and regular use. The cable is Fluke tested to Category 6 standards and is backed by StarTech.com's lifetime warranty.

Suitable for

• Gigabit Ethernet networks (1000 Mbps) in office, data center, or home environments
• Power-over-Ethernet deployments up to 100W
• High-bandwidth applications requiring up to 650 MHz performance
• Patch cabling where color-coding and durable connectors are needed

When it may not be suitable

This 100 ft (30.5 m) patch cable is intended for Ethernet patching and general network runs. It may not be suitable for permanent in-wall installations that require plenum- or riser-rated jackets, nor for environments requiring additional shielding against electromagnetic interference since it is an unshielded (U/UTP) cable.

Key specifications

• Cable category: Cat6 (meets Category 6 performance)
• Length: 100 ft (30.5 m)
• Conductor: 24 AWG, 100% copper
• Connector type: RJ45 with snagless design and molded strain relief
• Contact plating: 50-micron gold-plated contacts
• Bandwidth: up to 650 MHz
• PoE support: up to 100W
• Topology: U/UTP (unshielded)

How to use

Plug the RJ45 connectors into corresponding Ethernet ports on your network devices, ensuring the snagless boots remain intact during installation to avoid damaging the clip. Use the cable for patch-panel to switch connections, workstation links, or PoE device connections. Avoid bending the cable sharply at the connector to maintain signal integrity and prolong cable life.

What to consider before purchase

• Whether a plenum- or riser-rated jacket is required for in-wall or ceiling installations
• Need for shielded cable in electrically noisy environments
• Required cable length and whether 100 ft (30.5 m) suits your run
• Compatibility with your network speeds and PoE power requirements

Usage recommendations

For best performance, route the cable away from large power runs and sources of electromagnetic interference, avoid tight bends near the connectors, and verify connections with appropriate network testing tools after installation.