Adjustable TV mount STELL SHO4600 for 32"–55" TVs, tilt +5°/-18°, swivel ±90°, max load 35 kg, VESA up to 400×400, black

The STELL SHO4600 adjustable TV mount is a pull-out bracket designed for flat-panel TVs with screen sizes from 32" to 55". Constructed from steel with a black finish, it supports screens up to 35 kg and fits a wide range of VESA mounting patterns up to 400×400 mm. The arm extends from a minimum distance of 10.5 cm to a maximum of 42.9 cm from the wall and provides tilt adjustment of +5° / -18° and swivel of ±90° to help position the screen for comfortable viewing. Integrated cable management helps keep cables organized after installation.

Advantages

The mount offers a combination of tilt and wide swivel range that enables flexible viewing angle adjustments for living rooms, home offices or commercial spaces. Its pull-out arm with a long extension range allows the TV to be positioned further from the wall when needed and folded back to save space. Steel construction provides structural stability for displays within the specified load capacity. Cable management reduces visible clutter around the TV installation.

Suitable for

• Wall mounting 32"–55" flat-panel TVs that weigh up to 35 kg
• Rooms where variable viewing angles are needed (tilt +5° / -18°, swivel ±90°)
• Installations requiring pull-out functionality with 10.5–42.9 cm extension
• Setups that use common VESA patterns up to 400×400 mm
• Situations where cable management behind the TV is desired

When it may not be suitable

The mount is not suitable for TVs smaller than 32" or larger than 55", or for screens that exceed the 35 kg maximum load. It is also not intended for non-flat or unusually shaped displays that do not conform to standard VESA mounting patterns. For installations on weak or non-load-bearing walls, additional wall reinforcement or alternate mounting solutions may be required.

Key specifications

• Supported screen diagonal: 32"–55"
• Tilt range: +5° / -18°
• Swivel range: ±90°
• Extension from wall: 10.5 cm – 42.9 cm
• Maximum load capacity: 35 kg
• Material and finish: steel, black
• Supported mounting patterns: up to 400×400 mm
• Overall width × height × depth (approx.): 435 mm × 430 mm × 429 mm

How to use

Mount the wall plate to a suitable load-bearing wall following the included instructions and using appropriate fixings for the wall type. Attach the mounting arms to the TV using compatible VESA holes and secure all fasteners. Lift and secure the TV onto the arm assembly, then adjust tilt and swivel to the desired viewing position. Use the integrated cable management channels to route power and signal cables neatly along the arm and wall plate. Verify all fastenings and the stability of the installation before leaving the TV in daily use.

What to consider before purchase

• Confirm the TV screen size is between 32" and 55" and that the weight does not exceed 35 kg
• Check that the TV's VESA mounting pattern is supported and does not exceed 400×400 mm
• Ensure your wall type and fixings are suitable for a pull-out mount with the specified extension range
• Measure available wall space to accommodate the mount's full extension and swivel range

Usage recommendations

For safe and durable installation, use appropriate wall anchors for your wall type and tighten all fasteners to the manufacturer’s specified torque. Position the mount so the swivel and tilt ranges are not obstructed by nearby furniture or walls, and route cables through the cable management system to reduce stress on connectors.