Pad foam 13" SuperPads — SuperPads MFP-150130, 13-inch foam pad for cleaning and polishing

The SuperPads 13" foam pad MFP-150130 is a replaceable 13-inch accessory engineered for cleaning, polishing and light surface finishing tasks. Constructed from foam compatible with most rotary and dual-action polishers that accept 13" pads, it provides cushioning and even distribution of polishing agents to support paint correction, waxing and routine surface care. The pad's size and density are intended to balance contact area with control, making it suitable for larger panels and extended passes.

Advantages

The foam composition offers consistent product transfer and moderate cut while reducing heat buildup compared with firmer backing. Its 13" diameter increases coverage per pass to speed work on doors, hoods and roofs, and the replaceable design allows quick swapping between different foam types or contamination-free replacement. Compatibility with common 13" backing plates ensures straightforward attachment to rotary and dual-action polishers that accept this size.

Suitable for

• Paint correction and light defect removal on large surfaces
• Applying polish, glaze or wax on car hoods, roofs and doors
• General surface maintenance and cosmetic refinishing
• Use with 13" backing plates on rotary or dual-action polishers

Key specifications

• Diameter: 13 inches (approx. 330 mm)
• Material: foam designed for polishing applications
• Compatible tool types: rotary and dual-action polishers that accept 13" pads
• Typical use: cleaning, polishing and light surface finishing

How to use

Attach the SuperPads 13" foam pad securely to a compatible 13" backing plate following the polisher manufacturer's instructions. Apply a suitable amount of polish, compound or wax to the pad or work surface, start the polisher at a low speed to spread the product evenly, then increase speed as appropriate for the task while maintaining controlled, overlapping passes. Keep the pad flat against the surface to avoid edge chatter and monitor pad temperature and product residue; replace the pad when contaminated or worn.

Usage recommendations

For best results, select the pad density and polishing agent to match the level of defect correction required. Clean or replace the pad between different products to prevent cross-contamination and follow safety guidelines for machine polishing, including appropriate personal protective equipment and working in well-ventilated areas.