Power Cord Sygonix SY-5243888 IEC C13 to CEE7/4 H05VV-F 3G1 3.00 m, 230 V 10 A, Black

Sygonix SY-5243888 is a 3.00 m mains power cord with a CEE7/4 (Schuko) straight male plug on one end and an IEC C13 straight female coupler on the other. The cable uses H05VV-F 3G1 construction and is rated for 230 V, 10 A. It is intended as a standard replacement or connection lead for computers, monitors, printers and other office or IT equipment to European wall outlets.

Advantages

The cord provides a standard IEC C13 to CEE7/4 interface that is widely compatible with PC power supplies, monitors and peripherals. Its 3.00 m length offers flexible placement of devices relative to wall sockets, and the H05VV-F 3G1 cable construction ensures basic insulation and flexibility for typical indoor office and home use. The straight connectors simplify insertion into sockets and equipment without angled constraints.

Suitable for

• Desktop computers and workstations
• Monitors and all-in-one displays
• Printers, scanners and small office equipment
• Standard IT peripherals with IEC C13 inlet

When it may not be suitable

This cable is designed for standard indoor office and home environments and is not intended for outdoor use, heavy industrial applications or environments requiring special shielding, high-temperature tolerance, or IEC locking connectors. It is also not suitable where currents above 10 A or voltages different from 230 V are required.

Key specifications

• Cable length: 3.00 m
• Plug type (mains): CEE7/4 (Schuko) straight male
• Coupler type (device): IEC C13 straight female
• Cable type: H05VV-F 3G1
• Rated voltage: 230 V
• Rated current: 10 A
• Colour: Black

How to use

Ensure the connected device is switched off before plugging in. Insert the IEC C13 female coupler into the device's power inlet and plug the CEE7/4 male plug into a compatible grounded European wall socket. Route the cable to avoid tight bends, pinching or heavy mechanical stress. Disconnect by switching the device off and removing the mains plug from the socket.

What to consider before purchase

• Confirm your device has an IEC C13 inlet.
• Verify your local mains outlet is a CEE7/4 (Schuko) type and supplies 230 V at up to 10 A.
• Consider if 3.00 m length is suitable for your setup or if a shorter/longer cable is needed.

Usage recommendations

Use the cable indoors in dry, temperature-controlled environments and avoid running it under carpets or through doors where it may be pinched. Replace the cord if the insulation is damaged or connectors show wear.