Synergy21 Power Supply 24V 24W Furniture PSU with AMP Terminal Block (S21-LED-MOEB250158)

The Synergy21 Power Supply 24V 24W Furniture PSU with AMP Terminal Block is an AC/DC unit designed to provide a stable 24V DC output for furniture-integrated LED lighting and small DC devices. Its compact form factor and AMP terminal block make it suitable for installations where space is limited and a reliable low-voltage feed is required. The unit is intended for retrofit and new-build projects that need a dedicated 24V supply for LED strips, cabinet illumination and similar applications.

Advantages

This power supply delivers a consistent 24V DC output at up to 24W, offering reliable performance for low-power LED loads. The integrated AMP terminal block simplifies secure wiring and helps ensure good contact for multiple conductors. Its compact design allows discreet installation inside furniture, cabinets or shallow enclosures, while the AC/DC conversion provides isolation between mains and the low-voltage output for safer operation of LED and small electronic devices.

Suitable for

• LED strip lighting inside kitchens, wardrobes and display cabinets
• Under-cabinet and shelf illumination in furniture installations
• Low-power DC devices that require a stable 24V supply
• Retrofit projects and new installations where a compact power source is needed

When it may not be suitable

This 24W unit is intended for low-power applications; it is not suitable where higher total LED wattage or multiple high-current devices are required. For outdoor or exposed installations, additional protection or a unit rated for outdoor use should be selected. If inrush current or peak loads from connected devices exceed the supply’s capacity, a higher-power supply or current-limiting measures are necessary.

Key specifications

• Output voltage: 24V DC
• Maximum output power: 24W
• Connection type: AMP terminal block for low-voltage outputs
• Application: furniture-mounted and built-in LED lighting, small DC loads
• Form factor: compact design for installation inside cabinets or furniture

How to use

Mount the power supply in a ventilated, dry location inside the furniture or enclosure, ensuring clearance for heat dissipation. Connect the mains input according to local electrical regulations and with the mains supply disconnected. Wire LED strips or DC devices to the AMP terminal block, observing correct polarity and securing conductors under the terminal clamps. After wiring, restore mains power and verify the 24V output and LED operation. If dimming is required, use compatible 24V dimmers or controllers rated for the connected load.

What to consider before purchase

• Sum of connected LED wattages should not exceed 24W (allow margin for safety and future expansion)
• Ensure the installation location provides ventilation and protection from moisture
• Confirm compatibility with any dimmers or controllers intended for use
• Verify local electrical installation rules and, if required, use a qualified electrician for mains connections

Usage recommendations

Use the Synergy21 24V 24W PSU for single-zone furniture lighting or small DC loads where a compact, secure terminal connection is needed. When installing multiple LED circuits, plan load distribution and leave at least a 20% safety margin below the maximum rated power to avoid overheating and to accommodate inrush currents.