Power Supply Synergy21 S21-LED-MOEB250159 24V 36W Möbelnetzteil with AMP Terminal Block

Synergy21 S21-LED-MOEB250159 is a 24V, 36W furniture power supply designed for powering LED lighting and other low-voltage devices integrated into furniture. The compact AC/DC converter is intended for fixed installation in kitchens, cabinets, display cases and similar built-in lighting applications. It provides a stabilized 24-volt DC output and uses an AMP terminal block for secure, screw-clamped wiring, making it suitable for concealed mounting where a small footprint and reliable low-voltage supply are required.

Advantages

The unit offers a stable 24V DC output rated at 36W, suitable for a range of LED strips and low-power modules. Its compact form factor enables installation inside furniture carcasses and behind panels without significant space requirements. The AMP terminal block provides reliable, tool-accessible connections for input and output conductors, reducing the risk of loose contacts in long-term installations. The fixed-installation design and low-voltage output improve safety for indoor furniture lighting systems.

Suitable for

• Powering 24V LED strips, spotlights and modules inside kitchen cabinets and wardrobes
• Built-in lighting for display cases, retail fixtures and exhibition stands
• Low-voltage supply for small control modules, sensors or junctions inside furniture
• Concealed installations where compact AC/DC converters are required

When it may not be suitable

This power supply is not intended as a standalone portable adapter or for use where variable voltage or dimming control beyond the device’s rated output is required. It provides a fixed 24V DC output and a maximum continuous power of 36W, so it may be unsuitable when higher power or multiple high-load LED circuits must be driven from a single source.

Key specifications

• Output voltage: 24 V DC
• Maximum output power: 36 W
• Connection type: AMP terminal block for input and output conductors
• Mounting: Fixed built-in installation for furniture and cabinets
• Intended use: LED lighting and low-voltage furniture devices
• Form factor: Compact AC/DC converter suitable for concealed placement

How to use

Install the power supply in a dry, ventilated compartment inside the furniture, avoiding direct contact with heat sources and ensuring access for wiring. Connect the mains input conductors to the input side of the terminal block following local electrical codes and with the power disconnected. Connect the 24V DC leads to the output terminals, observing correct polarity. After secure wiring, mount the unit in its designated location and restore mains power. Verify output voltage and test LED circuits or devices before final assembly of furniture panels.

What to consider before purchase

• Required total wattage of the connected LEDs and devices should not exceed 36W
• Ensure the installation location provides adequate ventilation and access for wiring
• Confirm compatibility of connected lighting with a fixed 24V DC power source
• Check local electrical regulations for fixed furniture installations and required protection

Usage recommendations

For reliable operation, plan circuit loads with a margin below the 36W maximum (for example, 80–90% load) and use appropriately sized copper conductors for the length of the run. If dimming or control functions are required, choose compatible 24V controllers rated for the combined load. Have mains connections and final installation performed by a qualified electrician in accordance with applicable standards.