TACWISE Stiftnails Type 180 Multipack 4,000 pcs — 2,000 x 15 mm, 1,000 x 25 mm

TACWISE Stiftnails Type 180 Multipack contains 4,000 collated nails designed for use with pneumatic or manual stapling tools compatible with Type 180. The pack provides a mix of short wire nails: 2,000 nails at 15 mm length and 1,000 nails at 25 mm length, suitable for tasks that require discreet fastening and low-profile heads. The product is intended for general fastening, upholstery, trim work and light joinery where Type 180 nails are specified.

Advantages

The multipack format reduces the need for frequent reloading and keeps two commonly used lengths available in one container. Collated Type 180 stiftnails ensure easier feeding in compatible tools and more consistent placement. The short lengths minimise the risk of protrusion on thin materials while providing sufficient holding power for lightweight fastening jobs.

Suitable for

• Upholstery and furniture repairs
• Interior trim, mouldings and beadings
• Light joinery and small carpentry tasks
• Securing thin veneers, linings and fabrics

When it may not be suitable

This multipack is not intended for structural or heavy-duty applications where long nails or screws are required for load-bearing connections. The short 15 mm and 25 mm lengths may not provide adequate penetration or holding strength in thick timber or masonry substrates. For outdoor use in unprotected environments, consider using corrosion-resistant fasteners specified for exterior conditions.

Key specifications

• Total quantity: 4,000 collated nails
• Included lengths: 15 mm (2,000 pcs) and 25 mm (1,000 pcs)
• Nail type: Type 180 collated stiftnails
• Suitable for: pneumatic and manual stapling/ pinning tools compatible with Type 180
• Typical applications: upholstery, trim, light joinery and general fastening of thin materials

How to use

Load the Type 180 collated nails into a compatible pneumatic or manual stapling/pinning tool according to the tool manufacturer’s instructions. Position the tool so the nail tip contacts the workpiece at the intended fastening point and operate the tool using controlled pressure. Use the 15 mm nails for very thin materials or surface fixing and the 25 mm nails where slightly deeper penetration is needed. Check each fastened area for proper seating and repeat as required.

What to consider before purchase

• Confirm compatibility of your stapling or pinning tool with Type 180 collated nails
• Ensure the chosen lengths (15 mm and 25 mm) suit the material thickness and desired holding depth
• Evaluate whether a corrosion-resistant finish is needed for exterior or humid environments
• Check that the mixed pack quantities match your project usage to avoid waste

Usage recommendations

For consistent results, test nail length on a scrap piece of the same material before beginning work, adjust tool pressure as needed, and keep the collated strips dry and stored flat to maintain reliable feeding.