TACWISE Staple Wire Type 53, 6 mm (53/6), galvanized, 2,000 pcs, model 0334

TACWISE Staple Wire Type 53, 6 mm (53/6) are galvanized wire staples supplied in a pack of 2,000 pieces designed for general household and light workshop fastening tasks. With a 6 mm leg length and a Type 53 profile, these staples fit manual staplers and compatible tacker guns that accept Type 53. Galvanization provides a protective layer to reduce corrosion in typical indoor and sheltered-use conditions.

Advantages

These 53/6 staples offer consistent, uniform wire formation for reliable insertion and holding power in soft to medium-density materials. Galvanized finish improves resistance to rust and staining compared with plain steel, extending useful life in non-exposed environments. The large pack quantity of 2,000 pieces reduces the need for frequent reloading and is economical for recurring DIY, upholstery and light construction jobs.

Suitable for

• Attaching fabric and webbings in upholstery and craft work
• Fixing thin insulation, felt or membrane materials
• Light joinery tasks such as securing mouldings and battens
• General household fastening where a 6 mm leg staple is appropriate

When it may not be suitable

These staples are intended for indoor or sheltered use and may not provide adequate long-term corrosion protection in marine or fully outdoor exposed environments. They are designed for light to medium fastening tasks; for heavy-duty construction or very dense hardwoods a longer leg length or heavy-duty staple type would be preferable.

Key specifications

• Staple type: Type 53 profile
• Leg length: 6 mm
• Finish: Galvanized
• Material: Steel wire
• Quantity: 2,000 staples per pack

How to use

Load the pack into a manual stapler or tacker that accepts Type 53 staples following the tool manufacturer’s loading instructions. Position the material and apply steady pressure to ensure the staple legs penetrate the substrate and clinch securely. For best results, use on substrates compatible with a 6 mm leg length; avoid forcing staples into very hard or thick materials which may cause tool jams or deformed staples.

What to consider before purchase

• Confirm your stapler or tacker accepts Type 53 (53/6) staples
• Check that a 6 mm leg length is sufficient for the material thickness you will fasten
• Assess whether galvanized finish provides enough corrosion resistance for your environment

Usage recommendations

For consistent results, test a few staples on a scrap piece of the same material to confirm penetration and hold. Store the pack in a dry place to maintain the galvanization surface and avoid prolonged exposure to wet outdoor conditions.