T-Adaptor S Cat.5e Telegärtner J00029A0013

The Telegärtner T-Adaptor S Cat.5e (J00029A0013) duplicates an 8‑wire RJ45 connection into two 4‑wire sockets, enabling two subscribers to share a single network outlet without modifying existing cabling. Housed in light grey plastic (RAL 7035) and intended for 10/100BT and ISDN applications, the adaptor includes a 0.15 m connecting cable with an RJ45 plug and two RJ45 output sockets. Colour-coded mounting symbols and a transparent labelling plate allow clear identification of the outputs; a pin assignment label on the underside documents the wiring for future reference.

Advantages

The T-Adaptor S Cat.5e provides a simple way to add client connections where running new cables or installing additional distribution hardware is impractical or costly. It supports common network topologies such as Ethernet and Token Ring and is available in shielded or unshielded versions. The compact plastic housing, short 15 cm cable with RJ45 plug and clear labelling make installation and later tracing of the distributor structure straightforward.

Suitable for

• Extending an occupied network outlet to serve two 10/100BT or ISDN devices
• Temporary or low-cost expansions where new cabling is not possible
• Home or small-office environments with limited access to installation ducts

Key specifications

• Model: T-Adaptor S Cat.5e, Telegärtner J00029A0013
• Product type: RJ45 adaptor, 1 input → 2 outputs (8‑wire to two 4‑wire)
• Cable length: 0.15 m (15 cm) with RJ45 plug
• Connectors: 1 RJ45 plug, 2 RJ45 sockets
• Colour: Light grey (RAL 7035)
• Applications: 10/100BT, ISDN; Ethernet and Token Ring topologies
• EAN: 4018359227401

How to use

Insert the adaptor's RJ45 plug into the patch panel or distributor output (this functions as the adaptor input). Connect the two subscriber devices to the adaptor's two RJ45 sockets using standard patch cables. Ensure that each adaptor is connected so that the two inputs from the hub/patch panel correspond to the two outputs to the terminals, and observe the coloured mounting symbols to identify data and/or telephone outputs. Refer to the pin assignment label on the underside if wiring verification or tracing is required.

Usage recommendations

Use the T‑Adaptor S Cat.5e only where splitting an RJ45 outlet into two 4‑wire connections is acceptable (typical for 10/100BT or ISDN). This adaptor does not increase available bandwidth per device and is not a substitute for additional cabling or network switches when full simultaneous performance is required.