Multiswitch Televes MSE516C 5-in-16 passive cascade multischalter for SAT distribution

Televes MSE516C 5-in-16 passive cascade multischalter is a compact multiswitch designed to distribute satellite and terrestrial signals to multiple receivers. The unit accepts up to five inputs (one terrestrial input plus four satellite polarities) and provides sixteen user outputs. As a passive cascade multischalter, it can be installed in star topology as a terminal device or arranged in cascades to serve larger multi-user SAT installations. The device features low through and tap losses, good isolation between inputs and outputs, and two selector switches to adapt signal levels and operating modes.

Advantages

The compact design reduces installation space and eases mounting even in installations with a high number of users. Optimized electronics deliver very low insertion and tap losses, which reduces the need for intermediate amplifiers when forming cascades and helps achieve more balanced signal levels across outputs. Built-in switches allow attenuation of satellite inputs (Low Gain / High Gain) for each 8-user group and activation of TForce technology to automatically stabilise the terrestrial output level despite variations in reception conditions. Multiple powering options increase installation flexibility.

Suitable for

• Small to medium shared SAT installations in apartment buildings or communal areas
• Cascade distribution lines where several multiswitches are chained to increase user count
• Star topology central split to feed up to sixteen independent receivers
• Installations requiring stable terrestrial signal levels combined with satellite distribution

Key specifications

• Inputs: 5 inputs (one terrestrial input + four satellite polarities)
• Outputs: 16 user outputs
• Topology: Usable as terminal (star) or in cascade arrangements
• Signal control: 10 dB Low Gain / High Gain switch for satellite input attenuation per 8-user group
• Terrestrial control: TForce technology option to automatically adjust terrestrial output level
• Losses: Very low through and tap losses due to optimized electronic design
• Isolation: High isolation between inputs and outputs to reduce interference between paths
• Powering: Multiple powering methods — from dedicated power supply, via cascade through satellite inputs/outputs, or from a connected receiver where supported
• Design: Compact form factor suitable for installations with limited space

How to use

Connect the four satellite LNB polarities and the terrestrial antenna to the corresponding five inputs. Use coaxial cables to run each of up to sixteen receivers from the user outputs. For cascade operation, link the designated cascade input/output ports between multiswitch units and adjust the gain switch as required for each 8-user group. Activate the TForce switch if automatic terrestrial level stabilization is needed. Select the powering method appropriate to your installation: connect an external power supply, allow power through the cascade inputs/outputs, or enable receiver-powered mode if supported by connected receivers.

Usage recommendations

Install the multiswitch in a dry, ventilated location and use high-quality coaxial cable and connectors to preserve the low-loss characteristics. When planning cascades, measure signal levels at each stage and set the LG/HG attenuation switches to avoid overload or weak signals. Enable TForce for installations where terrestrial signal fluctuations are expected. Ensure compliance with local regulations and RED directives during installation.