Multiswitch Telmor TT-9/24-FT-PREMU 9 inputs 24 outputs (satellite distribution)

Telmor Multiswitch TT-9/24-FT-PREMU 9 inputs 24 outputs is a passive/active hybrid multiswitch designed to combine signals from multiple satellite LNBs and terrestrial inputs and distribute them to a large number of receivers. Intended for multisatellite installations in residential buildings or small commercial premises, the unit supports centralized antenna systems and multi-room TV setups where several tuners or receivers need independent access to satellite transponders.

Advantages

The multiswitch provides nine dedicated inputs to accept signals from several LNBs and a terrestrial input, while offering 24 independent outputs to feed multiple receivers. Its construction focuses on stable signal distribution and compatibility with standard satellite LNB polarisation and band switching protocols. The device is suitable for centralized distribution racks and wall-mount installations commonly used in apartment buildings or multi-room homes. It minimizes cabling complexity by aggregating inputs and delivering consistent signal levels to numerous endpoints.

Suitable for

• Residential buildings with multiple apartments requiring shared satellite distribution
• Multi-room homes where several satellite receivers or TVs require independent access
• Small commercial premises such as hotels, guest houses, or offices with a centralized antenna system
• Installations combining multiple satellite positions or LNB outputs into one distribution device

When it may not be suitable

This multiswitch is intended for installations that require a centralized distribution of multiple LNB signals to many outputs. It may not be suitable for single-receiver homes or very small installations where a direct LNB-to-receiver connection is sufficient. Also, if the installation requires powered amplification or active signal equalization across very long cable runs, additional amplifiers or powered distribution equipment may be necessary alongside the multiswitch.

Key specifications

• Number of satellite/LNB inputs: 9
• Number of user outputs: 24
• Supported signals: satellite DVB-S/DVB-S2 frequency bands and terrestrial input support (depending on system wiring)
• Signal distribution type: multiswitch combining multiple LNB outputs to multiple receivers
• Mounting: rack or wall-mount suitable for centralized installation setups
• Typical use: centralized antenna systems, multi-room TV distribution

How to use

Install the multiswitch in a central location close to the antenna/LNB cables and terrestrial antenna feed. Connect each LNB output and the terrestrial antenna input to the corresponding multiswitch inputs using quality coaxial cables and appropriate F-type connectors. Run coaxial cables from the multiswitch outputs to each receiver or wall outlet in the building. Ensure that each connected receiver is configured to use an external satellite tuner and that cabling preserves polarity and continuity. When required, integrate inline amplifiers or power supplies according to the overall signal budget and cable length to maintain adequate signal levels across all outputs.

What to consider before purchase

• Number of satellite LNB outputs available and compatibility with the multiswitch's nine inputs
• Total number of receivers or endpoints to be served (24 outputs available)
• Cable lengths and potential need for line amplifiers or equalizers for long runs
• Mounting location and access to power if additional active components are required

Usage recommendations

Use quality low-loss coaxial cables and properly tightened F-type connectors, verify each cable path with a satellite signal meter during commissioning, and plan for amplification if several outputs are at the end of long cable runs. For multi-satellite setups, label inputs and outputs clearly to simplify maintenance and future changes.