Amplifier Telmor WWK-951 Programmable 5–1000 MHz, 20 dB Gain

The Telmor WWK-951 programmable amplifier provides frequency-wide amplification across 5–1000 MHz with a fixed 20 dB gain. Designed for domestic and small commercial signal distribution, this amplifier supports boosting weak signals, compensating for cable losses and feeding multiple tuners. Programmable control lets installers adjust the amplifier's response to the local RF environment while maintaining a stable 20 dB amplification level across the supported band.

Advantages

The WWK-951 delivers a consistent 20 dB gain across the 5–1000 MHz range, enabling reliable signal strengthening for antennas and distribution networks. Programmable settings allow precise tuning to reduce interference and optimize performance for different frequency bands. Compact housing and straightforward connections make it suitable for wall- or rack-mounted installations in homes or small commercial premises.

Suitable for

• Improving TV reception in residential buildings
• Feeding multiple tuners or set-top boxes from a single antenna
• Compensating signal loss over long coaxial cable runs
• Small commercial or multi-room distribution systems

Key specifications

• Frequency range: 5–1000 MHz
• Gain: fixed 20 dB
• Programmable control for frequency response tuning
• Intended application: signal amplification and distribution
• Suitable for antenna and coaxial cable systems

How to use

Install the amplifier in a dry, ventilated location close to the antenna or distribution point. Connect the input coaxial cable from the antenna and connect outputs to the distribution cable or individual tuners. Use the programmable interface to adjust frequency response parameters according to local signal conditions; follow installer guidance or the product manual for specific programming steps. Ensure power is applied according to the manufacturer's instructions and verify signal levels at receivers after adjustment.

Usage recommendations

Place the amplifier as close to the signal source as practical to minimize pre-amplification cable losses, avoid mounting near large metal objects or strong local interference sources, and verify that combined output levels do not overload connected tuners. For best results, measure signal levels before and after installation and adjust programmable settings to balance amplification across the band.