Theben theLuxa S180 WH Passive Infrared Motion Sensor Wired Wall White 180 Degrees

The Theben theLuxa S180 WH passive infrared motion sensor is designed for reliable outdoor wall mounting and automated lighting control. Operating on a wired AC power connection at 230 V, this device uses passive infrared technology to detect movement and ambient brightness levels. It features a broad 180-degree detection angle and a flexible sensor head that can be turned horizontally by plus or minus 90 degrees and downwards by 30 degrees for precise coverage. Additional creep-under protection ensures that movement directly beneath the sensor is not missed, making it a practical choice for enhancing security and convenience around residential or commercial buildings.

Advantages

This wired wall motion sensor provides efficient automatic lighting control based on both presence and ambient light conditions. It features mixed light measurement, making it suitable for controlling various lighting types including fluorescent lamps, incandescent lamps, halogen lamps, and modern LEDs. The built-in zero-cross switching protects the relay and allows for high lamp loads, extending the operational lifespan of the connected equipment. Installation is straightforward with single-handed plug-in installation and compatibility with standard flush-mounted 60 mm sockets, while factory presets enable instant start-up right out of the box.

Suitable for

• Automated outdoor lighting control around buildings and pathways
• Enhancing security lighting for driveways, entrances, and yards
• Switching incandescent, halogen, fluorescent, and LED lamps
• Outdoor installations requiring wall mounting with a 180-degree coverage angle

When it may not be suitable

This device is not designed for indoor-only environments where a discreet recessed ceiling sensor is preferred. It may also not be suitable for monitoring areas that exceed the maximum specified detection range or require complex smart home integration without standard wired switching capabilities.

Key specifications

• Passive infrared motion detector technology
• 180-degree detection angle
• Wired 230 V AC power connection
• Designed for outdoor use
• Horizontal adjustment by plus or minus 90 degrees and 30 degrees downwards
• Creep under protection included
• Compatible with fluorescent, incandescent, halogen lamps, and LEDs

How to use

Mount the sensor securely onto an outdoor wall or a standard 60 mm flush-mounted socket using the single-handed plug-in installation method. Adjust the sensor head horizontally or vertically to cover the desired monitoring zone. Configure the adjustable brightness switching value and switch-off delay according to your specific lighting requirements, using the teach-in function if necessary to capture the current brightness level. Utilize the test function to verify the detection area during setup, and rely on the factory presets for instant operation if manual calibration is not immediately required.

What to consider before purchase

• Verify that your power supply matches the wired 230 V AC requirement
• Check that the 180-degree detection angle and range suit your intended outdoor installation site
• Ensure compatibility with your existing lighting load types such as LEDs or halogen lamps
• Confirm that wall mounting and surface or socket installation options meet your structural needs

Ensure the power supply is completely disconnected before installation or maintenance, and regularly test the detection area to maintain optimal security and lighting performance.