Switching actuator TP-LINK Tapo S110E(UN) — 7 channels, AC 100–250V, max 150W, 2.4GHz

TP-LINK Tapo S110E(UN) is a 7-channel switching actuator designed for smart home and small commercial electrical panels. It operates on AC 100–250 V and offers a maximum switching capacity of 150 W per channel. The device communicates over 2.4 GHz and features compact DIN-rail-compatible dimensions (44.7×33.9×16.1 mm), making it suitable for controlling lighting circuits and low-to-moderate loads where space in the panel is limited.

Advantages

The switching actuator provides centralized remote switching of up to seven channels without requiring a dedicated wired control system. Each channel supports on/off control at mains voltages within the specified range and a per-channel maximum load of 150 W. The compact form factor is intended to save panel space and simplify installation on DIN rail systems. Communication over 2.4 GHz enables integration with compatible smart-home setups that accept wireless switching actuators.

Suitable for

• Controlling LED and low-power lighting circuits in residential panels
• Switching small electrical loads such as fans, relay-fed outlets or control circuits
• Use in compact distribution boards where DIN-rail width is limited
• Implementing timed or remote switching for individual circuits in apartments or small offices
• Centralized load control for lighting scenes and simple automation tasks

Key specifications

• Channels: 7 switching channels
• Supply voltage: AC 100–250 V
• Maximum switching capacity: 150 W per channel
• Wireless: 2.4 GHz communication
• Dimensions: 44.7 × 33.9 × 16.1 mm (compact, DIN-rail compatible form)

How to use

Install the switching actuator on a compatible DIN rail inside the distribution board following local electrical regulations and with power disconnected. Connect line and load conductors to the corresponding terminals for each channel and ensure proper neutral connections where required. After powering the unit, complete any required wireless configuration so it can communicate over 2.4 GHz with the controlling hub or app. Assign channels to the intended circuits and verify each channel's operation by switching loads on and off while monitoring that the connected devices remain within the rated power limits.

Usage recommendations

Apply the actuator only to circuits and devices whose combined load per channel does not exceed 150 W. Ensure reliable 2.4 GHz wireless coverage at the installation location or use a compatible gateway to maintain stable communication. Avoid connecting high inrush current or inductive loads without verifying compatibility, and follow national wiring standards and safety practices when mounting and wiring the device.