DC/DC converter TracoPower TMR 6-2415WI, 6 W, 24 V input, 15 V output, 250 mA, SIL-8

TracoPower TMR 6-2415WI is a compact DC/DC converter providing isolated 6 W power conversion from a 24 V input to a regulated 15 V output at up to 250 mA. Supplied in a SIL-8 package, this module is designed for space-constrained industrial and embedded systems that require reliable isolation between input and output rails. The converter offers regulated output under typical load conditions and is suitable for powering control electronics, sensors and small low-power modules.

Advantages

This DC/DC converter combines a small SIL-8 footprint with galvanic isolation, enabling safe separation of power domains in industrial environments. The regulated 15 V output maintains stable voltage under load up to the rated current, while the module’s efficiency and thermal characteristics support continuous operation within specified limits. The solid-state design requires minimal external components and allows straightforward integration into printed circuit boards.

Suitable for

• Powering control and automation electronics in industrial equipment
• Supplying sensors and transducer interfaces requiring isolated rails
• Embedded systems and communication modules with limited PCB space
• Low-power analog or digital modules that need a regulated 15 V supply

Key specifications

• Input voltage: 24 V DC nominal
• Output voltage: 15 V DC regulated
• Output current: up to 250 mA
• Output power: 6 W maximum
• Package type: SIL-8 through-hole module
• Electrical isolation between input and output
• Compact PCB footprint suitable for space-limited layouts

How to use

Mount the SIL-8 module on the PCB according to the manufacturer’s recommended footprint and ensure correct pin orientation. Connect a stable 24 V DC supply to the input pins and route the regulated 15 V output to the target circuitry, observing correct polarity. Provide adequate clearance and thermal conduction paths on the PCB to help dissipate heat during continuous operation. Verify that connected loads do not exceed the 250 mA rated current and include fusing or input protection as required by the system design.

Usage recommendations

Place the converter away from high-temperature components and provide airflow or thermal vias if the application approaches the rated power limit. Ensure input supply filtering and transient protection are in place for industrial environments, and confirm isolation requirements for safety-critical installations.