Optical Quattro Converter Triax TVQ 05 1x SAT for 4 Participants

Triax TVQ 05 is an optical Quattro converter designed to receive a single SAT input delivered over optical fibre and convert it into four satellite outputs in a Quattro configuration. The device enables centralized optical-to-coax conversion for shared installations and multi-dwelling environments, providing four independent satellite feeds for use with multiswitches or individual receivers. The unit is intended to simplify cabling and to support distribution from a single optical feed to multiple downstream satellite distribution devices.

Advantages

The Triax TVQ 05 converts an optical SAT input to four separate Quattro outputs, allowing independent distribution of satellite polarisation and band feeds. Its Quattro output format is compatible with standard multiswitches and distribution equipment. The compact design supports centralized installation in technical rooms or headend racks, reducing the need for multiple fibre terminations at subscriber locations. The unit is produced by Triax and identified by MPN Quattro Abschlusseinheit- and EAN 5702663076297.

Suitable for

• Multi-dwelling buildings with a single optical SAT feed
• Shared installations in apartment blocks, hotels, or student housing
• Headend or central distribution cabinets converting optical SAT to coax
• Setups requiring connection to a Quattro-input multiswitch

Key specifications

• Brand: Triax
• Model: TVQ 05
• Function: Optical to four Quattro satellite outputs
• Input: 1x SAT (optical)
• Outputs: 4x SAT (Quattro configuration)
• MPN: Quattro Abschlusseinheit-
• EAN: 5702663076297

How to use

Install the Triax TVQ 05 in a suitable technical enclosure or headend rack. Connect the incoming optical SAT feed to the optical input following standard fibre handling and termination procedures. Connect the four Quattro coaxial outputs to the inputs of a multiswitch or to distribution amplifiers that accept Quattro-format feeds. Ensure power and grounding follow local regulations and the installation instructions of connected equipment. Perform signal level checks at the multiswitch and at representative receiver points to confirm correct conversion and distribution.

Usage recommendations

Use appropriate fibre connectors and dust protection during installation. Verify compatibility of downstream multiswitches with Quattro output format. Maintain accessible cabling and label outputs for easier maintenance and troubleshooting.