Tytan silver roofing sealing tape 15 cm x 10 m is a self-adhesive flashing tape designed for sealing roof joints, penetrations and overlaps. The 15 cm width and 10 m length make it suitable for repair and installation work on metal, tile and composite roofs. A silver weather-resistant finish provides protection against moisture and UV exposure, creating a flexible waterproof barrier around chimneys, vents, valleys and seams.
Advantages
The tape adheres to clean, dry surfaces and conforms to irregular shapes, allowing for rapid application without special tools. Its flexible backing accommodates thermal movement while maintaining a watertight seal. The silver surface increases reflectivity and contributes to UV resistance, extending service life when applied correctly. The product is supplied on a roll for convenient storage and measured application.
Suitable for
- Sealing roof seams and overlaps on metal and tile roofs
- Waterproofing flashings around chimneys, vents and roof penetrations
- Temporary or permanent repairs to leaks and damaged flashing
- Sealing joints on roof valleys and gutter connections
Key specifications
- Width: 15 cm
- Length: 10 m
- Self-adhesive flashing tape with flexible backing
- Weather-resistant and UV-resistant silver surface
- Suitable for application on metal, tile and composite roofing materials
How to use
Ensure the surface is clean, dry and free of loose debris, dust, oil or frost before application. Measure and cut the required length from the roll, remove the release liner and press the adhesive side firmly onto the substrate, smoothing out wrinkles and air pockets. Overlap adjacent strips by at least one half of the tape width for continuous protection. Use a roller or firm hand pressure to ensure full contact at edges and around penetrations. For long-term performance, apply at temperatures within the manufacturer’s recommended range and allow any trapped moisture to dry before sealing.
Usage recommendations
For best results, prepare surfaces by cleaning with a suitable degreaser and ensure temperatures are above 5°C during application. On very porous or uneven substrates, consider using a primer or applying a base layer to improve adhesion. Inspect sealed areas periodically and reapply or replace tape where adhesion has deteriorated or mechanical damage has occurred.
