Roof sealing tape Tytan 150 mm x 10 m — light brick color (TAS DEK 15 5)

Tytan roof sealing tape in light brick color is a self-adhesive flashing tape 150 mm wide and 10 m long designed for sealing joints, overlaps and roof penetrations on a variety of roofing materials. The tape creates a continuous adhesive barrier that protects against water and wind infiltration and is intended for both repair work and finishing details on residential and commercial roofs.

Advantages

The tape combines a flexible but dimensionally stable backing with a pressure-sensitive adhesive to ensure good initial tack and long-term adhesion to metal, bitumen membranes, shingles and most common roof substrates. Its coloured surface provides a neat, low-contrast finish on tiled and brick-toned roofs, helping to conceal repairs and flashings while maintaining UV and weather resistance. The product is easy to cut and apply without special tools and remains conformable to irregular surfaces and joints.

Suitable for

• Sealing overlaps and seams on roofing membranes and shingles
• Detailing around roof penetrations such as vents, chimneys and skylights
• Repairing small leaks and water paths on gutters and flashings
• Finishing roof edges and ridge lines where a slim adhesive tape is needed

Key specifications

• Width: 150 mm
• Length: 10 m
• Colour: light brick
• Format: self-adhesive roll suitable for manual application
• Adhesive type: pressure-sensitive adhesive formulated for outdoor roof applications
• Backing: flexible, weather-resistant material with UV stability
• Operating temperature range suitable for typical roof repair and installation conditions

How to use

Prepare the surface by cleaning it of dust, loose particles, oil and frost; the substrate must be dry and structurally sound. Measure and cut the required length, remove the release liner and press the adhesive side firmly onto the substrate, smoothing from the centre outwards to avoid air pockets. Overlap adjacent strips as recommended for continuous sealing and apply pressure along the edges to ensure full contact. Trim excess material and check the seal after application.

Usage recommendations

For best results apply at moderate temperatures and avoid installation in heavy rain or on wet surfaces. Store the tape in a dry place away from direct sunlight before use. When working on steep roofs or heights, follow appropriate safety procedures and use proper fall protection. If adhesion to certain substrates is uncertain, test a small area first.