Power extension cable UN angled plug 3×1.0 mm² with switch 1.5 m black

UN power extension cable with an angled plug, three conductors of 1.0 mm² cross-section and an integrated on/off switch. The 1.5 m length provides a short, practical extension for mains-powered devices while the right-angled plug reduces strain at the socket and helps keep connections close to walls or furniture. The black finish blends with typical household and office interiors and the cable is intended for indoor use where a compact extension and local switching are required.

Advantages

The angled plug design minimizes bending stress at the outlet and allows furniture to sit closer to the wall. The integrated switch gives convenient local control without needing to unplug the device. With three conductors of 1.0 mm² the cable supports typical low-to-moderate household and office appliances. The 1.5 m length balances reach and neatness, and the black sheath offers discreet appearance.

Suitable for

• Connecting lamps and lighting fixtures where a short extension and local switching are needed
• Powering small household appliances such as radios, chargers and desk fans
• Office equipment including monitors, printers and peripherals that require an accessible on/off control
• Situations where a right-angled plug is preferred to save space behind furniture

Key specifications

• Cable length: 1.5 m
• Conductor count and cross-section: 3 × 1.0 mm²
• Plug orientation: right-angled (angled) plug
• Integrated control: on/off switch built into the cable
• Color: black
• Intended use: indoor mains power extension with manual switching

How to use

Insert the angled plug into a compatible mains socket and connect the device to the cable end. Use the integrated switch to turn power on and off; ensure the switch is in the off position before connecting or disconnecting equipment. Route the cable so it is not pinched, kinked or placed under heavy furniture to avoid damaging the insulation. Verify that the device being powered is suitable for connection to a cable with 3 × 1.0 mm² conductors and that the combined load does not exceed the device and installation ratings.

Usage recommendations

For safe operation, use this extension cable only indoors and avoid exposing it to moisture or outdoor conditions. Do not use with high-current appliances that exceed the cable’s rated capacity. Periodically inspect the cable, plug and switch for damage; replace the cable if the insulation, conductors or switch show wear or defects.