Network Cable Tester Unit UT681C with LCD display and cable length measurement
Short description
Cheapest delivery:
Unisend LV
Product information
Description
UNI-T UT681C network cable tester is a portable tool for checking Ethernet, telephone and BNC cables. It detects breaks, short circuits, crossed pairs and incorrect connections, and is powered by a 9V battery. The compact design, clear LED indicators and simple one-button control make the UT681C suitable for quick field checks and more thorough inspections in offices or server rooms.
Advantages
The tester supports RJ45, RJ11 and BNC connectors (BNC via included RJ45-BNC adapter) and offers fast and slow test modes for signal continuity and fault diagnosis. A row of LEDs (LED1–LED8 and LED_G) shows the condition of individual conductors, while automatic shut-off after 10 minutes and a low-battery indicator help preserve battery life. The device is lightweight and certified to CE and UKCA standards.
Key specifications
- Manufacturer: UNI-T
- Manufacturer code: UT681C
- Supported connectors: RJ45, RJ11, BNC (with RJ45-BNC adapter)
- Test functions: detection of short circuits, breaks, crossings and incorrect connections
- Test modes: fast, slow
- Result display: LEDs (LED1~LED8, LED_G)
- Ethernet cable shielding test: Yes
- Power supply: 9V battery
- Automatic shutdown: after 10 minutes of inactivity
- Low battery indicator: below 7.2V
- One-button operation: Yes
- Operating temperature: 0–40°C
- Storage temperature: -10–50°C
- Operating humidity: 20–80% RH
- Storage humidity: 10–90% RH
- Maximum operating altitude: ≤2000 m
- Safety standards: CE EN61326-1:2013, EN61326-2-2:2013
- Net weight: transmitter 87 g, receiver 51 g
- Dimensions: transmitter 102 × 62 × 28 mm; receiver 102 × 37 × 28 mm
- Color: red-gray
How to use
Insert a 9V battery, connect the transmitter and receiver to the cable using the appropriate connector (RJ45, RJ11 or BNC with adapter) and press the single control button to start the test. Observe the LED sequence in the selected test mode (fast or slow) to identify continuity, open circuits, short circuits or crossed pairs. The tester will automatically switch off after 10 minutes of inactivity; replace the battery when the low-battery indicator activates.
Recommendations
Use the UT681C with cables disconnected from live equipment. For accurate diagnosis, test each cable end-to-end and, when necessary, repeat checks in both fast and slow modes. Store the tester within the specified temperature and humidity ranges to maintain performance.
Product comparison
The network cable tester Network Cable Tester Unit UT681C with LCD display and cable length measurement is compared with several alternative testers, including Network cable tester KEMOT G248 (NAR0040) — cable continuity and wiring tester, Network and telephone cable tester Shenzhen Noyafa Electronic NF-468V — RJ‑45 and RJ‑11 testing, Cable tester GEMBIRD NCT-2 — network cable tester, black, LED indicators, Network cable tester Unit UT681L for RJ45 and RJ11 connectors, continuity and wiring check, and Extralink Cable Tester for UTP and STP Network Cables. All these devices are designed to verify cable continuity and wiring in structured cabling systems, but the Unit model stands out with its built-in LCD display and cable length measurement capability, whereas most alternatives rely solely on LED indicators for basic pinout verification.
⚙️ The table below compares the display type, supported cable types, connectors, and advanced diagnostic features of each model.
| Comparison parameter | Unit UT681C | KEMOT G248 | Shenzhen Noyafa NF-468V | GEMBIRD NCT-2 | Unit UT681L | Extralink Cable Tester | Practical significance |
|---|---|---|---|---|---|---|---|
| Display type | LCD display | LED indicators | LED indicators | LED indicators | LED indicators | LED indicators | The LCD display on the Unit UT681C provides clearer and more detailed readouts compared to simple LED indicators. |
| Cable length measurement | Supported | Not supported | Not supported | Not supported | Not supported | Not supported | Cable length measurement helps estimate run lengths and approximate distance to faults, which is absent in competitors. |
| Supported connectors and cables | Ethernet network cables | RJ45, twisted pair | RJ45 and RJ11 (network and phone) | Ethernet networks | RJ45 and RJ11 (network and phone) | UTP and STP network cables | Models supporting RJ11 are more versatile for telephone lines, while length measurement adds professional diagnostic value. |
◎ The suitability table below evaluates the products across different user needs and practical use cases.
| Use case | Recommended product | Why |
|---|---|---|
| Precise cable length measurement and advanced diagnostics | Unit UT681C | The LCD screen and length measurement function make it ideal for assessing cable runs beyond simple continuity. |
| Testing telephone and network lines with basic indication | Shenzhen Noyafa NF-468V or Unit UT681L | Support for both RJ11 and RJ45 connectors makes them well-suited for mixed computer and telephone cabling. |
| Quick basic verification of network patch cords and links | KEMOT G248, GEMBIRD NCT-2, or Extralink Cable Tester | Straightforward, portable solutions with LED indicators for fast on-site continuity and miswire checks. |
Choosing Network Cable Tester Unit UT681C with LCD display and cable length measurement is most suitable when you need to measure cable runs and appreciate the clarity of an LCD readout during troubleshooting. If your tasks are limited to basic continuity checks or require telephone line (RJ11) compatibility without length measurement, simpler alternative models may serve those specific needs adequately.




