VERKADA HARDWARE Bullet Series CB52-2TBTE-HW-F — 2nd Gen 5 MP Outdoor Vandal‑Resistant PoE+ Dome Network Camera, H.264/H.265, 2688×1944, LAN 10/100

The VERKADA HARDWARE Bullet Series CB52-2TBTE-HW-F is a 2nd‑generation outdoor PoE+ dome/bullet network camera providing 5 MP resolution (2688×1944) and color day/night imaging for perimeter and exterior monitoring. The camera delivers H.264 and H.265 video compression options to balance image quality and storage efficiency, and supports 10/100 Mbps LAN connectivity. Designed for outdoor use, the model combines vandal resistance and weather protection with onboard storage capacity suitable for continuous or scheduled recording.

Advantages

This camera offers high-resolution 5 MP imaging that captures detailed scenes across entrances, parking areas, and building exteriors. Support for both H.264 and H.265 codecs allows administrators to optimize bandwidth and storage. PoE+ simplifies installation by supplying power and data over a single Ethernet cable, while the robust housing reduces the risk of damage in exposed or public locations. Built-in onboard storage enables local retention of footage for uninterrupted recording during network interruptions.

Suitable for (tasks / use cases)

• Perimeter surveillance of commercial or industrial sites
• Parking lot and garage monitoring
• Building exterior and entrance coverage
• Locations requiring vandal-resistant hardware and reliable outdoor performance
• Deployments that benefit from PoE+ power and local storage for continuous recording

When it may not be suitable

This model is intended specifically for outdoor perimeter and exterior monitoring; it may be excessive for simple indoor monitoring needs where lower resolution or less rugged construction would suffice. If a site requires higher frame rates for forensic slow-motion capture, specialized thermal imaging, or ultra-wide field of view lenses not offered with this model, consider alternative cameras designed for those specific requirements.

Key specifications

• Image sensor and resolution: 5 MP, 2688 × 1944 pixels
• Video compression: H.264 and H.265 support
• Power: Power over Ethernet Plus (PoE+)
• Network: 10/100 Mbps Ethernet connectivity
• Form factor: Outdoor vandal-resistant dome/bullet housing
• Imaging: Color day/night capability
• Onboard storage: Integrated local storage capacity (2 TB model variant)
• Mounting: Designed for exterior wall or ceiling installation

How to use

Install the camera at the chosen exterior location using appropriate mounting hardware and ensure the housing is securely fastened. Connect a single Cat5e/Cat6 Ethernet cable to provide both power and network connectivity via a PoE+ switch or injector. Configure network settings and storage/recording policies through the compatible management platform, select desired compression (H.264 or H.265) and recording resolution, and set motion detection or schedule-based recording as required. Verify camera angle and focus, and perform a test recording to confirm image quality and storage behavior.

What to consider before purchase

• Confirm required focal length and field of view for the intended coverage area
• Ensure site PoE+ infrastructure or compatible power injectors are available
• Verify outdoor mounting locations meet environmental exposure and vandal-resistance needs
• Plan storage retention and network bandwidth according to selected codec and resolution

Usage recommendations

For reliable perimeter monitoring, mount the camera at an elevation that minimizes tampering while providing a clear line of sight; use H.265 compression to reduce storage use and ensure the PoE+ supply can deliver sufficient power under full operating conditions.