VERKADA HARDWARE CH52-4TBE-HW Network Dome Surveillance Camera, Outdoor, 4×5 MP, 2688×1944, Motorized, PoE++

The VERKADA HARDWARE CH52-4TBE-HW is a fixed network dome surveillance camera designed for outdoor monitoring of perimeters, facilities and sites. The camera integrates four 5.0 MP image sensors to produce a combined resolution of 2688×1944, and supports color day/night imaging with motorized optics for remote framing and focus adjustments. Built with weather- and impact-resistant housing, the unit supports Power over Ethernet (PoE++) and connects via 10/100 LAN while using H.264 compression for video efficiency.

Advantages

The multisensor design provides broad coverage and reduces the need for multiple separate cameras, while four sensors working together capture high-detail scenes at 2688×1944 resolution. Motorized optics allow remote adjustment of viewing angle and focus without physical access to the camera, simplifying installation and ongoing repositioning. The robust housing is rated for outdoor use and resists environmental factors and mechanical impact; PoE++ simplifies power and data delivery via a single network cable. H.264 compression reduces bandwidth and storage requirements while maintaining image quality appropriate for perimeter and facility surveillance.

Suitable for

• Perimeter surveillance of commercial or industrial properties
• Monitoring parking lots, entrances and loading areas
• Wide-area coverage where a single multisensor camera can replace multiple fixed units
• Outdoor installations requiring weather- and impact-resistant hardware

When it may not be suitable

This camera is optimized for outdoor, fixed-position multisensor coverage and may be unnecessary where only a single narrow field of view is required. It uses H.264 compression and 10/100 LAN; environments requiring the latest codecs or higher network throughput (for example, 1 Gbps infrastructure or H.265-only workflows) may prefer different models.

Key specifications

• Sensors: four 5.0 MP image sensors
• Maximum combined resolution: 2688×1944
• Optics: motorized for remote adjustment of framing and focus
• Image mode: color day/night
• Compression: H.264
• Network: 10/100 LAN with Power over Ethernet (PoE++) support
• Housing: weather-resistant and impact-resistant for outdoor use

How to use

Mount the dome camera at the chosen outdoor location following recommended height and angle guidelines to achieve the desired coverage. Connect the camera to your network switch or PoE++ injector using a suitable Ethernet cable; the single-cable setup supplies both power and data. Use the camera’s remote motorized controls to fine-tune pan/tilt/zoom framing and focus from the management interface. Configure recording, motion detection and retention settings in your video management system, and verify image quality under day and night lighting conditions.

What to consider before purchase

• Confirm network infrastructure supports PoE++ and 10/100 Mbps connections
• Ensure your video management system is compatible with H.264 streams and multisensor stitching if required
• Plan mounting location for optimal field of view and environmental protection
• Check regional regulations on outdoor camera placement and privacy

Usage recommendations

For reliable outdoor operation, use shielded outdoor-rated Ethernet cabling, mount the camera under appropriate eaves or use additional covers if in extremely exposed locations, and schedule periodic checks to verify motorized alignment and lens cleanliness to maintain image clarity.