VERKADA HARDWARE Multisensor Series CH52-4TBE-HW-F — Outdoor Dome Network Surveillance Camera, 4×5 MP, 2688×1944, Motorized, PoE+

The VERKADA HARDWARE Multisensor Series CH52-4TBE-HW-F is an outdoor dome network surveillance camera combining four 5.0 MP sensors into a single housing to provide wide-area coverage with a combined image size of 2688×1944 pixels. The camera is built for outdoor use with weather- and impact-resistant construction, motorized adjustment for sensor orientation, support for Power over Ethernet Plus (PoE+), and modern video compression standards to balance image quality and bandwidth.

Advantages

This multisensor design reduces the number of separate cameras needed to monitor large perimeters by delivering multiple fields of view from one device. High-resolution 5 MP sensors and a combined 2688×1944 output enable detailed color imaging in daytime and improved low-light performance at night. Motorized adjustment simplifies installation alignment and onsite reorientation without mechanical repositioning. PoE+ integration and support for H.265/H.264 codecs streamline cabling and optimize storage and network usage for long-term recording.

Suitable for

• Perimeter and fence-line surveillance where multi-angle coverage is required
• Parking lots and vehicle areas that need broad area monitoring and license plate context
• Building exteriors and entries combining wide coverage with detail capture

When it may not be suitable

The camera is intended for outdoor, wide-area monitoring and may be excessive for small indoor rooms or single-point coverage needs where a single fixed lens camera would be more economical and less complex. Environments that require specialized low-light infrared-only imaging or extreme zoom beyond the built-in optics may need purpose-built PTZ or long-range lens systems instead.

Key specifications

• Sensor configuration: four 5.0 MP sensors providing combined 2688×1944 resolution
• Image compression: H.265 and H.264 support for efficient storage and streaming
• Network interface: 10/100 Mbps Ethernet with Power over Ethernet Plus (PoE+)
• Housing: outdoor dome with weather and impact resistance
• Adjustment: motorized sensor orientation for remote alignment
• Color imaging: daytime color and improved low-light performance for night monitoring

How to use

Mount the dome at the chosen outdoor location following the manufacturer’s mounting instructions and ensure a secure, weatherproof connection to the network. Supply power and network via a PoE+ switch or injector compatible with the camera’s power requirements. Use the camera’s motorized adjustment controls during setup to align each sensor’s field of view for the desired coverage. Configure video encoding, resolution, frame rate and recording settings on the recorder or cloud management platform, and verify that compression settings (H.265/H.264) meet your retention and bandwidth goals.

What to consider before purchase

• Confirm PoE+ supply compatibility and available switch/injector power budget
• Verify required network bandwidth and storage planning based on chosen resolution and codec
• Ensure mounting location provides the necessary fields of view and secure cabling routes
• Check environmental ratings if installation will face extreme temperatures or saline/industrial conditions

Usage recommendations

For optimal performance, configure H.265 compression with a frame rate and bitrate that balance image clarity and storage. Use the motorized adjustment to overlap sensor views slightly for consistent coverage across zones, and plan PoE+ infrastructure to allow firmware updates and continuous recording without intermittent power loss.