VERKADA HARDWARE Mini Series CM22 — 3 MP Indoor Dome Network Surveillance Camera, 2048×1536, H.265/H.264, PoE, 90‑day Onboard Storage

VERKADA HARDWARE Mini Series CM22 is a compact indoor dome network surveillance camera that captures 3 MP (2048×1536) video for day and night monitoring. The camera uses fixed‑iris optics and supports H.265 and H.264 video compression to reduce bandwidth and storage needs. Network connectivity is via 10/100 Ethernet with Power over Ethernet (PoE) compatibility; onboard storage retains recordings for up to 90 days. The CM22 is intended for unobtrusive ceiling or wall mounting in commercial and institutional interiors.

Advantages

The CM22 delivers detailed 3 MP resolution images while using modern H.265 compression to keep network load and storage consumption efficient. Its compact dome housing and fixed‑iris lens simplify installation and placement in office, retail, and facility environments. PoE support reduces cabling complexity by combining power and data on a single Ethernet connection. Built‑in onboard storage for 90 days provides local redundancy and immediate access to recent footage even if network storage is temporarily unavailable.

Suitable for

• Indoor office surveillance and employee safety monitoring
• Retail floor and point‑of‑sale area monitoring
• Common areas in hotels, schools, and healthcare facilities
• Small to medium facility interiors where unobtrusive ceiling mounts are preferred

When it may not be suitable

The CM22 is designed for indoor use and its dome form factor with fixed‑iris optics is not ideal for outdoor installations or scenes requiring wide dynamic range across extreme lighting contrasts. It lacks motorized zoom or varifocal lens options, so environments that require variable focal length or frequent remote re‑framing will need a different camera model.

Key specifications

• Resolution: 3 MP (2048×1536)
• Video compression: H.265 and H.264
• Lens type: fixed‑iris dome optics
• Network: 10/100 Mbps Ethernet
• Power: Power over Ethernet (PoE), DC 37–57 V compatible
• Onboard storage: 90 days of local recording retention
• Mounting: ceiling or wall mount compatible dome housing

How to use

Mount the CM22 on a suitable indoor ceiling or wall surface following the manufacturer’s installation guidelines. Connect the camera to your network switch or PoE injector using Cat5e or better Ethernet cable to provide both data and power. Configure network settings and video stream parameters using your network video management system or Verkada management interface, selecting H.265 for reduced bandwidth when supported. Verify camera angle and focus at installation, then confirm onboard storage and retention settings to ensure 90‑day recording availability.

What to consider before purchase

• Intended installation location must be indoors and protected from weather
• Check PoE power availability and compatibility with your switch or injector
• Confirm that fixed‑iris optics meet your field of view and focus requirements
• Ensure integration with your chosen video management or cloud system

Usage recommendations

For consistent image quality, position the camera to minimize direct strong light sources in the frame and use H.265 compression for routine recording to optimize storage. Schedule periodic checks of connection and retention settings, and place the camera at a height and angle that balance field of view with identifiable detail for the monitored area.