Network PTZ Surveillance Camera VERKADA HARDWARE CP52-E — 5 MP (2688x1944), Outdoor Vandal-Resistant, Day/Night, PoE++, H.265/H.264, 10/100 LAN, Motorized, 90-Day Onboard Storage

The VERKADA HARDWARE CP52-E is a motorized network PTZ surveillance camera engineered for outdoor, vandal-resistant deployments. It records 5 MP video at 2688 × 1944 resolution with day/night color imaging and supports both H.265 and H.264 compression. The unit uses 10/100 LAN connectivity with PoE++ power and includes built-in 90-day onboard storage for local retention. The camera's motorized pan/tilt/zoom mechanics make it suitable for perimeter, parking and critical infrastructure monitoring where active remote framing and long-term onboard retention are required.

Advantages

The CP52-E combines high-resolution 5 MP imaging with motorized PTZ control to deliver flexible coverage and detailed footage. H.265 and H.264 compression reduce bandwidth and storage demands while 10/100 LAN with PoE++ simplifies installation by delivering power and data over a single cable. Robust vandal-resistant construction and day/night color capability maintain reliable video capture in outdoor and variable-light conditions. Onboard 90-day storage provides local retention independent of continuous cloud connectivity.

Suitable for

• Perimeter and fence-line monitoring
• Parking lots and vehicle areas
• Public spaces where vandal resistance is required
• Critical infrastructure monitoring with need for remote PTZ control
• Sites that benefit from local video retention up to 90 days

When it may not be suitable

This camera requires an Ethernet network with PoE++ capability; installations lacking PoE++ infrastructure will need additional power provisioning. It is designed for outdoor, vandal-resistant use and PTZ operation—if a fixed, low-profile indoor camera or minimal moving parts are required, a fixed dome or bullet camera may be a better fit.

Key specifications

• Image resolution: 5 MP (2688 × 1944)
• Optics: motorized pan/tilt/zoom (PTZ)
• Imaging mode: day/night color
• Video compression: H.265, H.264
• Network interface: 10/100 LAN
• Power: PoE++
• Onboard storage: up to 90 days
• Environmental design: outdoor, vandal-resistant

How to use

Install the CP52-E at a suitable outdoor mounting point with access to a 10/100 Ethernet connection that provides PoE++ power. Configure network settings and compression preferences via the camera management interface compatible with your VERKADA system. Use the motorized PTZ controls from the management console to position framing and adjust zoom; rely on the onboard storage to retain video locally for up to 90 days. Periodically verify firmware updates and perform visual inspections of the housing to ensure vandal-resistant seals remain intact.

What to consider before purchase

• Availability of PoE++ on-site or need for an external power solution
• Required network bandwidth and compression settings for remote viewing
• Mounting location and environmental exposure (outdoor, vandal-prone areas)
• Integration with existing VERKADA or third-party management systems

Usage recommendations

For optimal results, mount the camera at an elevation and angle that maximizes PTZ coverage while minimizing obstructions; set H.265 compression for routine recording to reduce bandwidth and switch to higher quality H.264 or higher bitrate profiles for forensic capture when needed. Schedule regular checks of onboard storage status and firmware to maintain continuous operation.