Wooden corner molding Verlo Rożek 6.5x16.5 cm by Verlo

Verlo Rożek is a wooden corner molding sized 6.5 x 16.5 cm intended for finishing and protecting interior corners. The molding provides a neat transition between wall faces, covers raw edges, and increases resistance to mechanical wear in high-traffic areas. Made from solid wood with a shaped profile, this Verlo corner molding is suitable for use with skirting boards, trim, and other interior joinery where a traditional wooden appearance is required.

Advantages

This wooden corner molding combines the natural appearance of solid wood with a profile designed to protect and conceal vulnerable corner edges. Its dimensions allow installation on both standard and slightly thicker baseboards, delivering consistent visual alignment. The molding is easy to cut and fit, accepts common wood finishes, and provides a durable surface that reduces damage from knocks and abrasion.

Suitable for

• Finishing interior wall corners in residential and commercial spaces
• Protecting skirting board corners from impact and wear
• Concealing gaps and imperfect joins at wall intersections
• Restoration and refurbishment projects requiring wooden trim

Key specifications

• Material: solid wood
• Profile type: corner molding / rożek
• Nominal dimensions: 6.5 cm (width) x 16.5 cm (height)
• Finish compatibility: can be painted, stained, or varnished
• Typical installation: glued and/or nailed to substrate

How to use

Measure the corner area and cut the Verlo Rożek molding to the required length using a fine-toothed saw or mitre saw for clean edges. Dry-fit the piece to ensure correct alignment with adjacent skirting boards or trims. Apply construction adhesive to the rear face and press the molding into position; supplement with finishing nails if necessary for mechanical fixation. After installation, fill any joints or nail holes with suitable wood filler, sand smooth, and apply the chosen paint, stain, or varnish to match surrounding trim.

Usage recommendations

Store the molding flat in a dry, climate-controlled environment before installation to minimise dimensional movement. Acclimatise the wood to the room conditions for at least 24–48 hours. When cutting and finishing, use appropriate personal protective equipment and follow standard woodworking safety practices.