Electrical junction box ViPlast 002-03 grey 6-entry non-threaded glands no clamps 86×86×40 mm IP55

ViPlast 002-03 grey electrical junction box measures 86×86×40 mm and offers IP55 protection for electrical connections. The compact enclosure features six non-threaded cable entry points and is supplied without internal clamps, providing a simple housing for wire splices and small junctions in both indoor and outdoor environments where protection from dust and water spray is required.

Advantages

The enclosure is compact and lightweight, allowing installation in confined spaces. Its IP55 rating ensures reliable resistance to dust ingress and water jets, suitable for many common residential, commercial and light-industrial applications. Non-threaded cable entries simplify cable routing and reduce installation time when used with compatible glands or sealants. The absence of internal clamps gives flexibility for custom mounting, additional terminal blocks, or cable ties according to project needs.

Suitable for

• Protecting wire splices and small electrical junctions
• Indoor installations such as utility rooms, service cabinets and wall-mounted enclosures
• Outdoor or semi-exposed locations needing protection from dust and water spray
• Temporary or permanent installations where custom internal fittings are added

Key specifications

• Material: durable plastic (polymer) enclosure
• Dimensions: 86 × 86 × 40 mm (length × width × depth)
• Ingress protection: IP55 (protection against dust and water jets)
• Cable entries: 6 non-threaded gland openings
• Colour: grey
• Internal fittings: delivered without internal clamps or pre-fitted terminals

How to use

Mount the junction box on a suitable flat surface using screws or adhesive supports compatible with the enclosure material and mounting location. Route cables through the non-threaded entry points and seal around each cable with appropriate non-threaded glands, grommets or sealant to maintain IP55 protection. Arrange conductors and secure connections using terminal blocks, crimp sleeves or solder joints as required, taking care to preserve clearances and insulation. Close and fasten the cover according to the manufacturer's procedure to restore the enclosure's protective rating.

Usage recommendations

For outdoor or wet locations, use compatible sealed cable glands or grommets and check that cable diameters match the entry openings. Avoid exposing the plastic enclosure to prolonged direct sunlight or aggressive chemicals; if necessary, select UV-resistant mounting locations or protective coatings. Verify that the internal arrangement provides adequate clearance for heat dissipation and that any additional components installed do not compromise the ingress protection.