Ceiling mount Vision Magic TM-TELE for projectors, white, 10 kg capacity, adjustable depth 43.7–73.5 cm

The Vision Magic TM-TELE ceiling mount is a white telescopic bracket designed for fixed ceiling installation of projectors. It supports projectors up to 10 kg and offers an adjustable depth from 43.7 to 73.5 cm (overall length 440–735 mm). The mount combines tilt and roll adjustments for accurate projector alignment, a chute-through cable routing system for unobstructed connections, and safety features including a fall-arrest tether and a mechanical stop on the pole. The TM-TELE is supplied with a selection of screws, a spanner and hex tools to simplify fitting and is suitable for home theaters, classrooms and meeting rooms where stable, precise projector placement is required.

Advantages

The telescopic pole provides a wide length range without cutting or modifying components, enabling quick depth adjustment between 43.7 and 73.5 cm. Built-in tilt at the top and pitch/roll adjustment at the bottom allow alignment on sloping ceilings and fine optical positioning. The bracket includes cable management that keeps large connectors accessible and a fall-arrest tether plus a mechanical stop to improve installation safety. One-hand length clamp and included fastening tools reduce installation time and effort, while supplied screws and security bolts accommodate a variety of projector mounting threads.

Suitable for

• Home theater projectors up to 10 kg
• Classroom and lecture-room installations
• Meeting rooms and small auditoriums
• Sloping or irregular ceiling installations

Key specifications

• Maximum load capacity: 10 kg
• Adjustable depth / overall length: 43.7–73.5 cm (440–735 mm)
• Finish: white
• Full adjustment: tilt at top for sloping ceilings; pitch and roll at bottom
• Cable management: chute-through system for unobstructed connector access
• Safety features: fall-arrest tether and mechanical pole stop
• Includes selection of mounting screws, spanner and hex keys (tools included)
• Option for flush-mounting by removing pole

How to use

Install the ceiling plate to a suitable structural surface following local building regulations and ensure the chosen fixings are rated for the load. Adjust the telescopic pole to the required overall length and secure the clamp with one hand if needed. Position the projector mounting arms (spider) over the projector’s threaded inserts and fit the appropriate screw supplied. Use the pitch and roll adjustments and the top tilt mechanism to align the projector image. Route cables through the chute-through channel to maintain access to connectors and secure the fall-arrest tether to the projector as an additional safety measure.

Usage recommendations

Verify the projector weight does not exceed 10 kg and use appropriate ceiling fixings for the building material. For sloping ceilings, use the full tilt range to position the pole correctly and re-check alignment after tightening. Regularly inspect mounting bolts, tether and cable routing for wear and re-tighten as part of routine maintenance.