Power inverter Voltcraft MSW 2000-12-G — 2000 W, input 12 V DC, output 230 V AC

Pure sine wave power inverter Voltcraft MSW 2000-12-G converts 12 V DC battery or vehicle power to stable 230 V AC mains voltage with a continuous output rating of 2000 W. Designed for mobile, off-grid and backup power scenarios, the inverter supplies a clean sine waveform suitable for sensitive electronics, household appliances and power tools. The compact housing includes ventilation and protection features to ensure reliable operation when converting from 12 V to 230 V.

Advantages

The Voltcraft MSW 2000-12-G provides a pure sine output that reduces interference and heat in connected devices compared with modified sine inverters. With a 2000 W continuous power capability it supports larger loads and brief start-up peaks from motors and compressors. Built-in protection against overload, short circuit, over-temperature and low input voltage preserves both the inverter and connected equipment. Its design allows direct connection to 12 V battery systems or vehicle electrical systems for flexible use.

Suitable for

• Powering laptops, audio/video equipment and medical devices that require a stable sine wave output
• Running household appliances such as refrigerators, coffee machines and microwave ovens within the inverter's power limits
• Operating electric tools, compressors and pumps with high starting currents
• Mobile and off-grid installations in caravans, boats and service vehicles
• Backup power for small home systems during short mains outages

Key specifications

• Nominal input voltage: 12 V DC
• Nominal output voltage: 230 V AC
• Continuous output power: 2000 W
• Output waveform: pure sine wave
• Protections: overload, short circuit, over-temperature, low input voltage shutdown
• Cooling: forced ventilation (fan) and ventilated enclosure
• Typical applications: mobile power, off-grid systems, backup supply

How to use

Connect the inverter directly to a 12 V battery or to the vehicle battery via appropriate cable terminals, observing correct polarity. Place the inverter on a stable, ventilated surface and ensure the cooling openings are not obstructed. Switch the unit on and connect 230 V AC devices to the inverter's AC outlets. Monitor the load to avoid exceeding the continuous 2000 W rating and allow the inverter to cool if thermal protection activates. Follow manufacturer safety instructions and disconnect the battery when performing maintenance.

Usage recommendations

For reliable operation, use suitably rated cables and fuses between the battery and inverter, and avoid sustained operation near the maximum power limit. Allow for surge currents when starting motors or compressors by choosing devices or scheduling start times to prevent overload. Regularly check ventilation paths and battery connections to maintain stable performance.