Paint spray gun Vorel 81617 with 1000 ml bottom cup, 1.5 mm nozzle

Vorel 81617 paint spray gun with a 1,000 ml bottom cup and a 1.5 mm nozzle is a pneumatic tool intended for application of paint, lacquer and similar liquid coatings. The bottom-mounted reservoir supports continuous work with medium-size batches of coating, while the 1.5 mm nozzle provides stable atomization for medium-viscosity materials. This spray gun is designed for workshop and DIY environments where controlled spray pattern and consistent coverage are required on furniture, vehicles, metal and wooden surfaces.

Advantages

The tool combines a large-capacity bottom cup with a medium-sized nozzle to reduce the need for frequent refills and to maintain a uniform spray. Pneumatic operation ensures adjustable air-assisted atomization for smooth finish and predictable material usage. The gun’s design facilitates straightforward cleaning and maintenance of the nozzle and cup, and the bottom mounting improves balance during horizontal spraying tasks.

Suitable for

• Applying paint and lacquer to furniture and cabinetry
• Spraying primers and topcoats on metal surfaces and car parts
• Finishing wooden doors, frames and trim
• Small to medium repair and refurbishment projects in workshop or garage

Key specifications

• Nozzle diameter: 1.5 mm suitable for medium-viscosity coatings
• Reservoir capacity: 1000 ml bottom-mounted cup for extended spraying
• Operation: pneumatic air-assisted spray for adjustable atomization
• Application materials: paint, lacquer and similar liquid coatings
• Typical uses: furniture, automotive parts, metal and wood surfaces

How to use

Connect the spray gun to a compressed air source that matches the manufacturer's recommended pressure range for medium-viscosity coatings. Prepare the coating according to the paint manufacturer's instructions, including any thinning required for spray application. Fill the 1000 ml bottom cup, securely fasten it to the gun and adjust the air and fluid controls to achieve the desired spray pattern and material flow. Maintain a consistent distance and speed while moving the gun across the surface to ensure even coverage. After use, flush the cup and nozzle with a suitable solvent and disassemble nozzle components as needed for thorough cleaning.

Usage recommendations

Use appropriate personal protective equipment such as respiratory protection, safety goggles and gloves. Test spray settings on a scrap surface before working on the final piece. For best results with medium-viscosity paints and lacquers, adjust nozzle flow and air pressure incrementally until the atomization and coverage meet the required finish quality.