WAVIN bend S&W110X67PVC grey — PVC pipe elbow 110 mm x 67 mm

WAVIN bend S&W110X67PVC grey is a PVC pipe elbow intended for 110 mm drainage and sewer systems with a 67 mm offset. The grey PVC body resists corrosion and common chemicals encountered in wastewater installations, making it suitable for both underground and indoor routing of sewage and rainwater. The elbow is designed to change pipe direction and to correct alignment where runs require a 67 mm offset while preserving flow capacity in standard 110 mm pipework.

Advantages

The PVC construction provides durability against corrosion and many sewer chemicals while remaining lightweight for easier handling and installation. Its standardized 110 mm diameter ensures compatibility with common drainage pipes and fittings. The 67 mm offset allows precise alignment adjustments without complex assemblies, reducing the number of joints and potential leak points. Smooth internal surfaces support efficient flow and reduce the risk of clogging.

Suitable for

• Residential and commercial sewer and drainage installations with 110 mm pipework
• Underground drainage lines and stormwater systems
• Indoor wastewater routing where a 67 mm offset is required
• Repair or modification of existing 110 mm PVC drainage runs

Key specifications

• Material: PVC (polyvinyl chloride), grey
• Nominal diameter: 110 mm
• Offset: 67 mm
• Application: wastewater, drainage, sewer systems
• Connection type: socket/solvent-weld compatible with standard 110 mm pipes

How to use

Ensure mating pipes and fittings are clean and free of debris. Prepare pipe ends according to the chosen joining method (solvent cement or manufacturer-recommended jointing technique). Apply appropriate primer and solvent cement if using solvent-weld connections, insert the pipe fully into the socket and hold until initial set. For elastomeric or gasketed systems, follow the gasket manufacturer’s guidance to obtain a watertight seal. Align the elbow so the 67 mm offset achieves the required pipe route, then secure the assembly according to local plumbing codes and best practices.

Usage recommendations

Use compatible 110 mm PVC fittings and approved solvents; avoid exposure to open flame or incompatible chemicals during storage and installation. Verify local building codes for burial depth and bedding requirements when installing underground. Periodically inspect accessible joints for signs of settlement or damage and ensure proper support to prevent undue stress on the elbow.