Lubricant spray WELDTITE Ceramic Lubricant Spray 150 ml, ceramic-based spray lubricant

WELDTITE Ceramic Lubricant Spray 150 ml is a ceramic-based aerosol lubricant formulated to reduce friction and protect metal surfaces. The product leaves a thin ceramic film that enhances wear resistance, reduces galling and helps prevent corrosion on exposed parts. Supplied in a 150 ml spray can, it is intended for maintenance of moving parts where long-lasting lubrication and low friction are required.

Advantages

The ceramic formula provides a hard, low-friction coating that improves component life and reduces metal-to-metal wear. Aerosol application ensures even coverage and access to tight assemblies. The spray resists wash-off and offers corrosion protection while maintaining ease of reapplication when periodic maintenance is needed.

Suitable for

• Bicycle chains, derailleurs, pivots and other cycle components where low friction is important
• Bolts, nuts and threaded fasteners to reduce seizing during assembly and disassembly
• Door hinges, locks and mechanical linkages that require quiet operation and wear reduction
• Sliding surfaces, bearings and small mechanisms in outdoor or workshop environments

When it may not be suitable

This spray is intended as a surface lubricant and protective coating, not as a replacement for greases in heavily loaded gearboxes or large bearings. It may not provide sufficient lubrication under extreme pressure or high-temperature conditions where specialized lubricants are required. Compatibility with plastics, painted surfaces or rubber seals should be verified on an inconspicuous area before widespread use.

Key specifications

• Form: aerosol spray
• Volume: 150 ml
• Active technology: ceramic-based lubricant film
• Properties: low friction, wear resistance, corrosion protection
• Typical applications: metal-to-metal contacts, fasteners, hinges, small moving mechanisms

How to use

Shake the can well before use. Clean and dry the surface to remove dirt, grease and loose corrosion. Hold the can upright and apply a thin, even coat from a distance of 15–25 cm. Allow the solvent to evaporate and the ceramic film to form before operating the mechanism. For best results, apply to clean metal and reapply periodically according to operating conditions and wear.

What to consider before purchase

• Intended use: assess whether a spray lubricant is suitable or if a grease is required for heavily loaded parts
• Material compatibility: test on plastics, painted surfaces and seals before full application
• Operating conditions: consider temperature, load and exposure to water or chemicals when selecting a lubricant

Usage recommendations

Use WELDTITE Ceramic Lubricant Spray for routine maintenance of bicycles, hinges and fasteners. Apply sparingly to achieve a thin protective film; excessive buildup can attract dirt. Store the can in a cool, dry place away from direct heat and open flame, and follow local regulations for aerosol disposal.