WELDTITE self‑adhesive inner tube patches RED DEVILS kit WLD-1031 — 6 mm patches, box of 12

WELDTITE self‑adhesive inner tube patches RED DEVILS kit WLD-1031 contains twelve ready-to-use 6 mm self-seal patches designed for quick repair of punctures in bicycle and other pneumatic inner tubes. The compact box stores individually protected patches that adhere without additional glue, enabling fast field repairs and reducing downtime. The kit is branded by WELDTITE and intended as a practical consumable for cyclists, bike shops, and emergency repair kits.

Advantages

The self-adhesive patches eliminate the need for separate vulcanising cement, simplifying application and making repairs faster and cleaner. Each 6 mm patch is suitable for small punctures and comes in a compact dispenser box that protects patches from contamination and makes them easy to carry. The adhesive formulation is designed to bond reliably to typical inner tube rubber compounds used in bicycles and similar tyres.

Suitable for

• Repairing small punctures in bicycle inner tubes
• On‑the‑road emergency repairs during rides
• Use in home repair kits for scooters, wheelchairs, and other pneumatic tyres with similar rubber
• Bike workshop or retail service counters as a fast replacement option

When it may not be suitable

This kit is intended for small punctures up to the diameter of the 6 mm patch and may not seal large cuts, rips, or sidewall damage. It is not designed for tubeless tyre repairs or for professional vulcanised repairs where a permanent, structural bond is required. For patches larger than 6 mm or for damaged valve areas, consider a different repair method or a replacement inner tube.

Key specifications

• Patch type: Self‑adhesive (self‑seal) inner tube patches
• Patch size: 6 mm diameter
• Quantity: 12 patches per box
• Intended materials: Rubber inner tubes (bicycle and similar pneumatic tubes)
• Packaging: Compact protective dispenser box for field use

How to use

Locate and mark the puncture, then deflate and clean the surrounding area of the inner tube to remove dirt and grease. Roughen the rubber surface lightly with an abrasive tool if available, peel a patch from its backing and press it firmly onto the puncture. Apply even pressure for several seconds to ensure good contact, then re-inflate the tube and check for leaks. Allow a short settling time before reinstalling the tube into the tyre.

What to consider before purchase

• Patch diameter (6 mm) — suitable for small punctures only
• Self‑adhesive type — no glue required but may not replace vulcanised repairs
• Quantity — 12 patches per box; consider how many repairs you expect to perform
• Compatibility — designed for rubber inner tubes; not for tubeless tyres or major tyre damage

Usage recommendations

Store the box in a dry place and keep patches sealed until use. For best results, clean and slightly roughen the tube surface before applying a patch. Carry the compact box on rides for quick roadside fixes and replace the inner tube after multiple repairs or if the tube shows extensive wear.