U-bolt set WENTRONIC 60504 for pipe diameter up to 60 mm

U-bolt set WENTRONIC 60504 is designed to fasten and secure pipes or round poles with diameters up to 60 mm. The set includes U-bolts with corresponding nuts and washers as supplied, offering a straightforward clamping solution for tubular supports. It is intended for use where a durable, low-profile clamp is required to fix fixtures, brackets or mounts to circular profiles.

Advantages

The U-bolt set provides a compact and reliable mechanical connection with even pressure distribution around the pipe. Made for straightforward installation, the components allow stable fixation without the need for specialized tools beyond common wrenches. Its geometry adapts to round profiles up to 60 mm, reducing movement and improving the longevity of attached fixtures. Corrosion resistance depends on the supplied material finish, allowing selection according to environmental exposure.

Suitable for

• Mounting satellite dishes and antenna brackets on masts or poles
• Securing plumbing pipes and conduit runs
• Fixing signage, small poles or tubular supports
• Temporary or permanent fastening of round profiles in outdoor installations

Key specifications

• Compatible pipe diameter: up to 60 mm
• Set contents: U-bolts with matching nuts and washers (as supplied)
• Application type: clamp for round profiles and tubular supports
• Typical use environments: outdoor and indoor mounting where mechanical fastening to a round profile is required

How to use

Place the U-bolt around the pipe or pole so that the threaded ends align with the fixture or bracket. Position the bracket or support plate over the threaded ends, then fit washers and nuts onto the threads. Tighten the nuts evenly using appropriate wrenches until the fixture is held securely; avoid overtightening to prevent deformation of the pipe or damage to the finish. If installed outdoors, ensure the material finish is appropriate for local weather conditions and check torque periodically.

Usage recommendations

Verify pipe diameter before installation to ensure compatibility with the 60 mm maximum. Use matching hardware strength and thread size for the load conditions. For corrosive or marine environments choose hardware with suitable corrosion protection or apply additional protective coatings. Inspect mounts after exposure to heavy loads or extreme weather.