-
HDD capacity:
The maximum storage capacity of the hard disk, usually measured in bytes e.g. GB.
-
8000 GB
-
Interface:
Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
-
Serial ATA III
-
Read seek time:
-
8 ms
-
Write seek time:
-
8.6 ms
-
Type:
Characteristics of the device.
-
HDD
-
Weight:
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
-
0.715 kg
-
HDD speed:
The rotational speed of a hard disk expressed in rotations per minute. The faster the better.
-
7200
-
Mean time between failures (MTBF):
Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
-
2000000 h
-
Storage temperature (T-T):
The minimum and maximum temperatures at which the product can be safely stored.
-
-40 - 70
-
Operating temperature (T-T):
The minimum and maximum temperatures at which the product can be safely operated.
-
5 - 60
-
Height:
The measurement of the product from head to foot or from base to top.
-
26.1 mm
-
Average latency:
The average duration before a device can start with a job (for example reading a file from a hard disk).
-
4.16 ms
-
Operating shock:
Environmental requirements for optimal protection from impact in operating mode
-
70 G
-
Width:
The measurement or extent of something from side to side.
-
101.6 mm
-
Depth:
The distance from the front to the back of something.
-
147 mm
-
Quantity:
The number of products there are.
-
1
-
HDD size:
The amount of data that the hard drive can store.
-
3.5
-
Non-operating shock:
Environmental requirements for optimal protection from impact in non-operating mode
-
300 G
-
Start/stop cycles:
-
600000
-
Non-operating vibration:
Environmental requirements for vibration in non-operating mode
-
1.04 G
-
Operating vibration:
Environmental requirements for vibration in operating mode
-
0.67 G
-
Operating voltage:
Defines the range of operating voltages available
-
5 V
-
Power consumption (idle):
-
7.4 W
-
Power consumption (read):
-
8.8 W
-
Power consumption (write):
-
8.8 W
-
Component for:
What this product is used as a part of (component for).
-
Server/workstation
-
HDD interface transfer rate:
-
6 Gbit/s
-
HDD sustained transfer rate:
-
243 MiB/s
-
Harmonized System (HS) code:
-
84717050
-
Storage drive adapter included:
An adapter is included for usage with additional storage drived included in the packaging.
-
No
-
Storage drive buffer size:
-
256 MB
