Antenna wall mount T‑shaped WFmetal K30T42Z, hot-dip galvanized steel, length 30 cm

A T-shaped antenna wall mount by WFmetal, model K30T42Z, is a 30 cm long bracket made from hot-dip galvanized steel for mounting antennas and related fixtures to vertical surfaces. The hot-dip galvanization provides a uniform corrosion-resistant coating that increases service life in outdoor environments. The mount’s T-shaped form offers lateral support and a stable connection point for satellite, TV or radio antennas and their masts while keeping the installation close to the wall.

Advantages

The hot-dip galvanized steel construction ensures consistent protection against rust and weathering, suitable for long-term outdoor use. Its 30 cm length positions antenna hardware at a practical distance from the wall to reduce interference while minimizing wind load. The T-shaped profile distributes mechanical stresses across the wall attachment and the horizontal support, improving stability for mounted fixtures. The design enables straightforward installation with commonly available fasteners and provides a compact solution when pole or tower mounting is not feasible.

Suitable for

• Mounting satellite dishes and TV antennas on building walls
• Attaching radio antenna masts in residential and commercial installations
• Securing small to medium antenna assemblies where proximity to the wall is required
• Outdoor antenna installations requiring corrosion-resistant mounting hardware

Key specifications

• Material: hot-dip galvanized steel for exterior durability
• Form factor: T-shaped wall bracket for lateral and vertical support
• Effective length: 30 cm from wall to outer support point
• Surface finish: continuous galvanic coating applied by hot-dip process
• Suitable load application: supports small to medium antenna assemblies and masts
• Mounting method: wall-fixed bracket designed for standard mechanical fasteners

How to use

Select an appropriate mounting location on a vertical, load-bearing surface free of obstructions and within the antenna’s line of sight. Mark and drill holes that align with the bracket’s wall plate, then secure the bracket using suitable anchors or bolts for the substrate (masonry, concrete, or timber). Attach the antenna mast or mounting hardware to the horizontal T arm and tighten clamps or bolts to ensure a rigid connection. Verify the alignment and torque settings, then perform a final inspection to confirm all fasteners are secure and the assembly is stable.

Usage recommendations

Use corrosion-resistant fasteners compatible with hot-dip galvanization and select anchors rated for the substrate and expected wind loads. Periodically inspect the mount and fasteners after severe weather and at regular maintenance intervals. Avoid painting or coating the galvanised surface without consulting compatibility guidance, as some coatings can reduce corrosion protection.