WORK STUFF K2 Separator for Detailing Bucket (D7022) — debris separator for wash bucket

WORK STUFF K2 Separator for Detailing Bucket is a rigid debris separator designed to sit inside a detailing wash bucket and isolate dirt, grit and loose particles from the cleaning zone. The insert creates a lower chamber where abrasive material collects below the waterline, reducing the risk of recontamination when rinsing brushes, wash mitts or microfiber cloths. The accessory is intended for car washing and paint-care workflows that require contamination control to help protect surfaces and cleaning tools.

Advantages

The WORK STUFF K2 Separator reduces swirl marks and abrasion by keeping sand and grit away from the working surface during washing. Its rigid construction stabilizes the bucket contents and prevents debris from floating back into the wash area. The design helps extend the service life of brushes and microfiber products by minimizing direct contact with contaminants. The separator is simple to insert and remove for inspection and cleaning.

Suitable for

• Hand car washing with a wash mitt or brush
• Paint-decontamination and safe-contact rinses
• Detailing workflows where contamination control is required
• Professional and home use to preserve surface finish

Key specifications

• Type: rigid bucket debris separator insert
• Compatibility: fits standard detailing wash buckets (check bucket diameter)
• Function: separates and traps sediment and grit below wash zone
• Material: durable rigid plastic construction for repeated use
• Maintenance: removable for rinsing and drying

How to use

Place the separator into a detailing wash bucket before adding water and shampoo, ensuring it sits flat and stable on the bucket base. Use the recommended two-bucket or rinse-method: after working a panel, rinse the wash mitt or brush in the bucket above the separator so contaminants settle beneath the insert. Periodically lift the separator to inspect and remove trapped debris, then rinse and return it to the bucket. Store the separator dry when not in use.

Usage recommendations

To maximize protection of paintwork, use the WORK STUFF K2 Separator together with a two-bucket method and a high-quality wash mitt. Regularly check and remove accumulated sediment from beneath the insert and avoid using heavily contaminated water for final rinses.