Pool cleaning robot Wybot C2PRO wireless

Wybot C2PRO wireless pool cleaning robot is a cordless autonomous cleaner designed to remove debris, sand and fine sediments from pool floors and walls. The compact device integrates a 4600 mAh lithium-ion battery for extended operation, a two-layer filtration system with a 180 µm basket and multiple cleaning programs controllable via Bluetooth from a mobile app. The wireless design simplifies setup and retrieval and is suitable for residential pools up to 150 m² and for common pool finishes such as vinyl, concrete and fiberglass.

Advantages

The Wybot C2PRO provides up to approximately 3–3.5 hours of runtime on a single charge and reaches full charge in about 2–2.5 hours, enabling frequent use with minimal downtime. Its two-layer filtration captures both larger debris and fine particles while the three-motor drive and ultrasonic sensors support reliable movement and consistent cleaning. Bluetooth connectivity and a mobile app allow selection of cleaning modes, scheduling and OTA updates. Cordless operation removes cable tangling and increases placement flexibility.

Suitable for

• Residential pools up to 150 m²
• Pools with floors and walls made of vinyl, concrete or fiberglass
• Routine removal of leaves, sand and fine sediment
• Periodic deep cleaning of pool bottoms and walls

Key specifications

• Battery: 4600 mAh lithium-ion, 21.6 V
• Operating time: up to approx. 3–3.5 hours per charge
• Charging time: approx. 2–2.5 hours
• Power consumption: 65 W
• Motors: 3 motor drive system
• Filtration: two-layer filtration with 180 µm filter basket and ultra-fine filter
• Flow rate: 11.5 m³/h
• Cleaning speed: up to 10 m/min
• Sensors: ultrasonic navigation
• Connectivity: Bluetooth with mobile app control and OTA updates
• Cleaning modes: Eco, Floor, Wall, Standard Full Pool, Wall then Floor
• Programmable cycle options via app (various cycle lengths)
• Maximum recommended pool area: 150 m²
• Weight: 8 kg
• Dimensions: 360 × 360 × 240 mm

How to use

Place the Wybot C2PRO into the pool following the user manual and power the unit on using the onboard button or the mobile app. Select the desired cleaning mode (for example Floor, Wall or Standard Full Pool) and start the cycle. After the cycle completes, retrieve the robot using the included hook or floating elements, remove and rinse the filter basket and filters under running water, then allow them to dry before reinstalling. Charge the robot on its charger until the charge-level indicator shows full before the next long cleaning session.

Usage recommendations

For best results, run the robot on a regular schedule appropriate to pool use and local conditions, empty and rinse the filter basket after each cycle when heavily soiled, and store the device in a dry, shaded place while charging. Use the Eco mode for light maintenance and the Standard Full Pool mode for comprehensive cleaning. Ensure the pool water chemistry is within recommended ranges to avoid accelerated wear of seals and filters.