Carbon Monoxide Detector X-Sense XC0C-iR Wi‑Fi – residential CO sensor with app connectivity

The X-Sense XC0C-iR Wi‑Fi is a residential carbon monoxide detector with built-in Wi‑Fi connectivity and a backlit LCD that displays real‑time CO concentration in ppm. Designed for wall or ceiling mounting, the device combines a high‑performance electrochemical CO sensor and a loud local alarm with remote app notifications via the X‑Sense Home Security app. It supports two-stage alerting—pre-alert and full alarm—so occupants receive early warnings and final alarm signals according to detected CO levels.

Advantages

The XC0C-iR provides continuous monitoring with accurate, stable CO measurement and EN 50291-1:2018 compliant alarm thresholds. Integrated 2.4 GHz Wi‑Fi enables instant push notifications, sharing with household members and remote silencing through the app. A clear LCD shows current ppm values at a glance, LED indicators report status and faults, and an audible alarm of at least 85 dB ensures local alerting. The device runs on a replaceable CR123A battery and includes end‑of‑life, low battery and malfunction notifications to maintain reliable operation over its expected lifetime.

Suitable for

• Residential homes and apartments
• Kitchens and rooms with fuel‑burning appliances (installed per local guidelines)
• Households that want remote notifications and multi‑user alerting
• Areas where visible CO concentration readout is useful for quick assessment

Key specifications

• Sensor type: electrochemical CO sensor
• Safety standard: EN 50291-1:2018 compliant
• Power: 1 × CR123A 3 V replaceable battery
• Battery life: up to 1 year (with weekly testing)
• Product lifetime: up to 10 years
• CO alarm response times: 50 ppm — 60–90 min; 100 ppm — 10–40 min; 300 ppm — 0–3 min
• Operating temperature: 4.4 to 37.8 °C
• Operating humidity: 10–85% RH (non‑condensing)
• Alarm volume: ≥ 85 dB at 3 m
• Alarm silencing time: ≤ 9 minutes
• Wi‑Fi: 2.4 GHz (2400–2483.5 MHz), maximum RF power 100 mW
• Weight and dimensions: 148 g; 142 × 75 × 32 mm

How to use

Mount the XC0C-iR on a wall or ceiling in a central location following local installation guidelines and the included mounting template. Insert the supplied CR123A battery and complete the initial setup with the X‑Sense Home Security app over a 2.4 GHz Wi‑Fi network to enable remote alerts. Test the unit using the Test/Silence button after installation and periodically thereafter. In the event of an elevated CO reading, follow the alarm instructions: ventilate the area, evacuate occupants if necessary, and seek fresh air and assistance.

Usage recommendations

Place the detector where occupants spend time and away from obstructions that could block airflow; avoid positioning directly above fuel‑burning appliances or in very humid or dusty locations. Perform weekly tests and replace the CR123A battery as indicated by low battery alerts. Replace the detector at the end of its 10‑year service life to ensure continued compliance with EN 50291‑1:2018 and dependable CO protection.