Motion sensor ZAMEL MCR-02 microwave 1200W 360° 220–240V IP20 (EXT10000050)

ZAMEL MCR-02 is a microwave motion sensor for automatic switching of lighting and electrical loads up to 1200 W. Designed for indoor installations, it operates on 220–240 V AC and provides full 360° detection coverage. The sensor uses microwave detection to sense movement through reflection of emitted signals, enabling reliable activation in corridors, stairwells, utility rooms and other interior spaces where automatic lighting control is required. The device has an IP20 protection rating suitable for dry, indoor environments.

Advantages

The sensor offers 360° coverage and microwave-based detection for consistent response to movement, including detection through certain non-metallic obstructions. It supports switching of loads up to 1200 W and connects directly to standard 220–240 V AC supply, simplifying integration into existing lighting circuits. Compact design and indoor IP20 protection make it suitable for mounting in typical residential and commercial interiors. The microwave principle provides stable performance in varied lighting conditions and can reduce manual operation of lights.

Suitable for

• Corridors and hallways
• Stairwells and landings
• Utility rooms and storage areas
• Entrances and small common areas in offices or apartment buildings

Key specifications

• Detection technology: microwave motion detection
• Maximum switching load: 1200 W
• Supply voltage: 220–240 V AC
• Detection angle: 360°
• Protection rating: IP20 (indoor use)
• Intended mounting: indoor ceiling or wall locations as per installation instructions

How to use

Install the sensor according to the manufacturer’s installation instructions, connecting it to the 220–240 V AC supply and the controlled lighting or load. Position the device to ensure unobstructed coverage of the target area and to utilize the full 360° detection pattern. After powering up, adjust sensitivity and time settings if the device includes such controls, and test operation by moving through the detection zone to confirm proper activation and hold times. Ensure the load does not exceed the specified maximum switching capacity.

Usage recommendations

Use the motion sensor indoors only in dry environments; avoid outdoor or wet locations due to the IP20 rating. For optimal performance, avoid mounting near large metallic objects that could interfere with microwave signals and follow recommended installation heights and orientation provided by the manufacturer. Verify compatibility with the type of lighting or electrical load to ensure safe switching within the 1200 W limit.