ZAMEL remote-controlled socket RWG-01K 230V 16A 300 m IP20

The ZAMEL remote-controlled socket RWG-01K 230V 16A 300 m IP20 is a single-phase mains switching outlet intended for indoor use. It allows wireless on/off control of lamps, household appliances and other electrical devices up to 16 A at 230 V. With a radio range up to 300 metres in open space and IP20 protection, the unit is designed for simple retrofitting where permanent wiring changes are not required.

Advantages

The device provides safe mains switching of connected loads using a compact socket form factor compatible with standard single-phase installations. Wireless control simplifies installation and operation without the need to run additional control cabling. Rated for currents up to 16 A at 230 V, the socket supports a wide range of domestic and light commercial loads. The IP20 enclosure is suitable for indoor environments and helps protect the unit from accidental contact.

Suitable for

• Remote on/off control of table and floor lamps
• Switching small household appliances such as fans and heaters within rated current
• Integration into wireless lighting and convenience control setups
• Temporary or retrofit installations where surface or socket-mounted control is preferred

Key specifications

• Supply voltage: 230 V AC
• Maximum switching current: 16 A
• Wireless control range: up to 300 m (open area)
• Protection rating: IP20 (indoor use)
• Operation: single-phase mains switching
• Form factor: socket for direct connection of appliances

How to use

Install the socket in an indoor location with appropriate access to the mains outlet and within the expected wireless range of the control transmitter. Connect the appliance to the socket and verify that the supply voltage matches the device requirements. Use the compatible remote control or transmitter to switch the socket on and off; follow any pairing procedure supplied with the control unit to bind the socket to the transmitter. Observe the maximum current rating and avoid connecting loads that exceed 16 A.

Usage recommendations

Place the unit away from sources of moisture and dust; ensure ventilation around heat-producing appliances. For reliable wireless performance, avoid metal obstructions between the transmitter and the socket and maintain reasonable line-of-sight where possible. Do not exceed the specified current and voltage ratings and consult a qualified electrician for permanent installations or if in doubt about compatibility with inductive or high inrush current loads.